Search found 1151 matches
- Fri Nov 24, 2023 8:38 pm
- Forum: Early model JD crawler technical support
- Topic: jd420 pics
- Replies: 135
- Views: 532510
Re: jd420 pics
Sonny, Found out that ...self contained units w/d cells will work on 2 and 3 cyl models....as are only 6 volt systems on these....though i do know can use later models with 12 volt battery side saddle to the 6 volt, will see once i can get the dry cell timing light. Though i do know it gonna be hass...
- Tue Nov 21, 2023 9:56 am
- Forum: Early model JD crawler technical support
- Topic: 440
- Replies: 2
- Views: 4516
Re: 440
Well Blackdirt, Welcome to the world of EXPENSE..If you are talking of a JD440 crawler it helps to identify what you have. I assume it is a crawler/dozer, these things are pretty nice...once they are all mechanicaly functioning properly. To answer your question...if it is a jd440....they usually hav...
- Sun Nov 19, 2023 9:16 pm
- Forum: Early model JD crawler technical support
- Topic: jd420 pics
- Replies: 135
- Views: 532510
Re: jd420 pics
Hi Jim, Unfortunately I do NOT possess a timing light and never used one.., usually do this old school but it has been a bit long in the tooth since last from scratch. I do have a meter that has a setting for 4 ..6.. and 8 cylinder timing...which i have not used as yet...again not sure how it would ...
- Sun Nov 19, 2023 11:18 am
- Forum: Early model JD crawler technical support
- Topic: jd420 pics
- Replies: 135
- Views: 532510
Re: jd420 pics..install final
Also, Forgot to go into the final installation...it was relatively easier than removing the blamed thing...l..is really a pain trying to line it up and get directed into the carrier tube without damaging the blamed thing...once its lined up it does go a bit better.....however....i did need to use de...
- Sun Nov 19, 2023 11:10 am
- Forum: Early model JD crawler technical support
- Topic: jd420 pics
- Replies: 135
- Views: 532510
Re: jd420 pics..install engine
Well guys, I am back to engine....it is now installed....am now at TDC #1...both valves..closed...so i check flywheel timing mark is at TDC...now check distributor and rotor is pointing directly at the #1 spark plug contact?????....flywheel is NOT at the SPARK timing mark. So what does that tell me....
- Mon Oct 23, 2023 9:46 am
- Forum: Early model JD crawler technical support
- Topic: 440ic steering clutches
- Replies: 7
- Views: 9331
Re: 440ic steering clutches
After you get chance to run it a spell and get feel of it.....you will know when it needs adjustment again....at least adjustments do not "cost"...just your time and efforts...while it is up in air run it awhile and operate the steering on both sides to get familiar with feel....this may take severa...
- Sun Oct 15, 2023 6:42 pm
- Forum: Early model JD crawler technical support
- Topic: jd420 pics
- Replies: 135
- Views: 532510
Re: jd420 pics
Well Folks, Was finally able to get back on the 420..had to remove my center housing (no reverser) because i neglected to put the woodruff key in the hollow shaft to the clutch pedal....this thing can give you the willys....the woodruff key is really special..i actually picked one up at ACE Hardware...
- Sun Oct 15, 2023 6:20 pm
- Forum: Early model JD crawler technical support
- Topic: 440ic steering clutches
- Replies: 7
- Views: 9331
Re: 440ic steering clutches
Yes engine hoist most practical....though really needs a nice smooth floor...are a bit awkward....get crawler up on solid wood blocks or jackstands but watch placement for the lift legs...my 420 was actually put (glued) to tranny with red gasket sealer....I had to use wood shims all around the thing...
- Fri Oct 13, 2023 11:59 am
- Forum: Late model JD crawler technical support
- Topic: Non running JD straight 350
- Replies: 6
- Views: 7947
Re: Non running JD straight 350
Also...non-running....engine blown..worn out?...large lawn ornament
- Fri Oct 13, 2023 11:23 am
- Forum: Early model JD crawler technical support
- Topic: 440ic steering clutches
- Replies: 7
- Views: 9331
Re: 440ic steering clutches
GalenB, Welcome to the board...first thing is...do you have any manuals for it, if not contact Lavoy, owner of this site...he constantly works on these things and sells parts for them. Now, to get into needs....first look thru the top cap and bung cap to visually inspect and see if there is oil, deb...
- Tue Sep 19, 2023 8:05 am
- Forum: Early model JD crawler technical support
- Topic: JD 420c Crawler Hydraulic System
- Replies: 8
- Views: 9927
Re: JD 420c Crawler Hydraulic System
Hank,
It always helps if you add location to your profile..someone may be nearby if help needed...profile is accessed in the drop down box where you login
It always helps if you add location to your profile..someone may be nearby if help needed...profile is accessed in the drop down box where you login
- Wed Aug 30, 2023 2:23 pm
- Forum: Early model JD crawler technical support
- Topic: jd420 pics
- Replies: 135
- Views: 532510
Re: jd420 pics..ring gear
Guys, just a heads up with bit of info....serial number 129803....took engine flywheel to my engine shop....had them switch the ring gear as couple teeth degraded.....they actually flipped in over and all teeth on that side are in good shape....seems these are actually made to be flipped....not just...
- Tue Aug 01, 2023 12:12 pm
- Forum: Late model JD crawler technical support
- Topic: '68 350B right side final drive removal
- Replies: 12
- Views: 6251
Re: '68 350B right side final drive removal
re...blind bearing removal...someone once told me on like a pilot bearing..to get it out..fill the back space and hole with grease and wood dowel in shaft hole ..hammer and grease pushes bearing out??...have not had to try that yet so cannot verify...kinda use hydraulics to push out..wood dowel shou...
- Tue Aug 01, 2023 8:05 am
- Forum: Early model JD crawler technical support
- Topic: Size
- Replies: 7
- Views: 8830
Re: Size...seating
Gus, i found a volunteer seat...came from a Honda Pilot..front passengerseat..has wiring for heated seat if i change over to 12 volt...large seat cushion..imitation leather..adjustable and lean back and folds to front a bit...seems a bit high as yet..used base mount out of old jd40 dozer with flat p...
- Thu Jul 27, 2023 9:09 am
- Forum: Early model JD crawler technical support
- Topic: jd420 pics
- Replies: 135
- Views: 532510
Re: jd420 pics/problem?
RE..previous post Anyone got idea on the right steering? This is old, cruddy..dry now...filled the square holes in plugs etc.. stuff that looks like it may have come down from the half moon shaped cover plate...perhaps a bad gasket on cover plate? Cannot see above it as tranny just above...steering ...