If it weighs 4000 lbs, you will never keep the front end on the ground. I have had guys tell me that a 350 is light on the front with one on.
Also keep in mind, if your 440 was not a hoe crawler from the factory, it is not capable of carrying a hoe.
Lavoy
Search found 10809 matches
- Tue Apr 03, 2007 9:00 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: wanted backhoe for 440 icd
- Replies: 6
- Views: 7622
- Mon Apr 02, 2007 8:06 pm
- Forum: Show & Tell
- Topic: Opening Pandora's box...
- Replies: 3
- Views: 6239
- Mon Apr 02, 2007 7:34 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 Serial Numbers
- Replies: 4
- Views: 3808
- Mon Apr 02, 2007 7:31 pm
- Forum: Show & Tell
- Topic: The next victim
- Replies: 24
- Views: 27683
Here are some pics of the partially assembled engine. This engine is bored .045, crank turned .010/.010, cam reground, lifters refaced, new valves, guides, springs, keepers, hard valve seats, head and block planed, new cam bushings, bearings, pistons, wrist pin bushings, rods cut and resized. http:/...
- Mon Apr 02, 2007 7:11 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: New track spring covers for 440, 1010, 350
- Replies: 5
- Views: 5776
- Mon Apr 02, 2007 7:02 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: New track spring covers for 440, 1010, 350
- Replies: 5
- Views: 5776
New track spring covers for 440, 1010, 350
Coming soon, new reproduction track spring covers for 440, 1010, and 350. I just finished the die tonight, hope to try it out later this week, and start making covers. Will let you know when I get some done.
Lavoy
Lavoy
- Mon Apr 02, 2007 7:00 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: New MC, 3 roller 40 trackframe covers
- Replies: 1
- Views: 2743
New MC, 3 roller 40 trackframe covers
Coming soon, new reproduction track frame covers for MC and 3 roller 40. I have a prototype in the shop now, hope to have some finished covers in the next couple of weeks.
Lavoy
Lavoy
- Mon Apr 02, 2007 6:56 pm
- Forum: Show & Tell
- Topic: Opening Pandora's box...
- Replies: 3
- Views: 6239
You need to remove what is left of your throwout tube and install a new one. At the same time, remove the throwout bearing holder and clean it up to remove all the rust. Install a new throwout bearing and make sure that the holder will slide in and out on the throwout tube with just hand pressure ea...
- Mon Apr 02, 2007 6:52 pm
- Forum: Early model JD crawler technical support
- Topic: New shoes for the 440icd
- Replies: 2
- Views: 3270
- Mon Apr 02, 2007 6:51 pm
- Forum: Early model JD crawler technical support
- Topic: 1959 440icd reverser
- Replies: 2
- Views: 3108
Could be an adjustment, but if it died suddenly, I would guess the teeth are gone off the clutch discs. This is a real common deal if the reverser has been shifted without using the clutch. If the crawler you have was not a hoe crawler originally, you do not have the correct mount, pump, or plumbing...
- Mon Apr 02, 2007 6:48 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 Serial Numbers
- Replies: 4
- Views: 3808
- Mon Apr 02, 2007 6:47 pm
- Forum: Early model JD crawler technical support
- Topic: Copper Bushings in after market rollers
- Replies: 2
- Views: 2960
- Mon Apr 02, 2007 9:57 am
- Forum: Early model JD crawler technical support
- Topic: 420 Reverser Parts Needed
- Replies: 2
- Views: 3659
- Sat Mar 31, 2007 7:18 am
- Forum: Show & Tell
- Topic: First Time Reattaching a Slipped Track
- Replies: 12
- Views: 25949
- Sat Mar 31, 2007 7:16 am
- Forum: Early model JD crawler technical support
- Topic: I hate Master pins
- Replies: 9
- Views: 9303