JDcrawlers Messageboard

i saw some new rollers on ebay just the other day for around 100 dollars a piece

im looking for all the brackets for mounting the canopy on my 350 . the dealer said they no longer can get them.

second gear # t16326 , cluster gear # t16598 , and your price for each . thanks.

lavoy do you have the second gear and cluster gear for the 350

talk about a pain in my butt , i finally found both master pins now i'm going to fab up a jig with my portable hyd cylinder . thanks again for all the help guys

do i use a big hammer and a pin to knock it out

how do i know if i have interlock rails

the manual shows the master pin is different from the others with a snap ring holding it , all the other pins are straight . i have look over and over and haven't found the master pin yet. with the crawlers age i figured the master pin was replaced ,all the pins on both sides look exactly the same n...

after waiting forever for nice weather , i finally took the trany cover off and found that the second and reverse sliding gear ate up pretty bad along with the cluster gear. well guess i'm going to have to replace the bad gears.

how much does the kit cost?

lavoy do you also have power steering booster kit part # AT27076

i'm changing out the clutchs on the left side only , should i do the right side also since i'll have the whole back half of the crawler torn down.

wanted to know if Lavoy had the template for setting the pressure plate on my 350

ok thanks for that info, the metallic clutch pads are alot more money. again thanks for the help this site is a great source of info.

on the clutchs should i get the fiber or metallic discs .