The manuals are current from Deere, but getting pricey. There are usually some on E-bay, either reprints, or used ones, either way, quite a bit cheaper than Deere. If you prefer CD, Deere does have most of the manuals on CD now too, usually cheaper than printed.
Lavoy
Search found 10806 matches
- Wed Apr 26, 2006 9:17 pm
- Forum: Late model JD crawler technical support
- Topic: 450 problems - gggrrrrrr!
- Replies: 10
- Views: 14439
- Wed Apr 26, 2006 1:48 pm
- Forum: Off-topic discussions
- Topic: 400th Registered User
- Replies: 25
- Views: 25559
It would be fun, that if for sure. At the rate that we are going, number 500 could be here by August. So far, we are averaging a member a day. Maybe the 500th person should host the event at their place. :lol: I suppose the easiest thing to do would be plan it around a show like Expo or something. L...
- Wed Apr 26, 2006 1:44 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 JD Crawler
- Replies: 1
- Views: 2869
- Tue Apr 25, 2006 6:22 pm
- Forum: Early model JD crawler technical support
- Topic: 6 volt or 12 Volt Battery?
- Replies: 1
- Views: 3437
- Tue Apr 25, 2006 3:01 pm
- Forum: Early model JD crawler technical support
- Topic: 440icd late model steering and final
- Replies: 23
- Views: 15810
I see, yes the thin tube is the throwout tube, the actual casting that the throwout bearing presses on to is the carrier. I do not have any new carriers, only used. One other thing you can do if all esle fails. Set the finger height at 1", that will bring the fingers 1/4" closer to the throwout bear...
- Tue Apr 25, 2006 2:26 pm
- Forum: Early model JD crawler technical support
- Topic: 440icd late model steering and final
- Replies: 23
- Views: 15810
Throwout tube has no effect on clutch setting. Taking pics of the assembled clutch probably will not tell me anything. I think you have the clutch lilnkages and such on the crawler adjusted incorrectly. Read your service manual again, there might be something you missed. It is almost impossible for ...
- Tue Apr 25, 2006 10:32 am
- Forum: Early model JD crawler technical support
- Topic: 440icd late model steering and final
- Replies: 23
- Views: 15810
- Tue Apr 25, 2006 9:15 am
- Forum: Early model JD crawler technical support
- Topic: 440icd late model steering and final
- Replies: 23
- Views: 15810
- Tue Apr 25, 2006 8:58 am
- Forum: Early model JD crawler technical support
- Topic: New old dozer
- Replies: 20
- Views: 18018
- Tue Apr 25, 2006 8:41 am
- Forum: Early model JD crawler technical support
- Topic: New old dozer
- Replies: 20
- Views: 18018
I have a new reprint. It is a reprint, but not a cheesy photocopy, it was professionally done from a good original. Online ordering is SO expensive that for now I am not going to do it. The server space alone is cost prohibitive, let alone the cost of designing the system to do it. I am going to fin...
- Tue Apr 25, 2006 8:25 am
- Forum: Off-topic discussions
- Topic: 400th Registered User
- Replies: 25
- Views: 25559
- Tue Apr 25, 2006 8:22 am
- Forum: Late model JD crawler technical support
- Topic: 450 problems - gggrrrrrr!
- Replies: 10
- Views: 14439
- Tue Apr 25, 2006 8:11 am
- Forum: Early model JD crawler technical support
- Topic: New old dozer
- Replies: 20
- Views: 18018
Get the engine completely disassembled to the bare block. A big problem now may be the lifter bores, but they could be honed if need be. If you have that much internal rust, you need to have the block shotblasted to remove the rust. If you are extremely careful you might be able to sandblast it, but...
- Tue Apr 25, 2006 8:07 am
- Forum: Early model JD crawler technical support
- Topic: 440icd late model steering and final
- Replies: 23
- Views: 15810
- Mon Apr 24, 2006 8:37 pm
- Forum: Off-topic discussions
- Topic: 400th Registered User
- Replies: 25
- Views: 25559
You know, I was just thinking (yeah I know, scary thought), when we hit 500 members, really should have a big get together. You know the wives won't want to go and be around a bunch of idiots talking crawlers. I was thinking some place with lots of food, good looking women, booze, gambling, but not ...