Search found 301 matches
- Mon Oct 10, 2016 6:37 am
- Forum: Late model JD crawler technical support
- Topic: 350B injection pump
- Replies: 15
- Views: 12141
- Mon Oct 10, 2016 6:30 am
- Forum: Late model JD crawler technical support
- Topic: Left break drags in reverse - only
- Replies: 6
- Views: 5090
- Mon Oct 10, 2016 6:27 am
- Forum: Late model JD crawler technical support
- Topic: 450c track adjuster
- Replies: 14
- Views: 13024
you are right, collapse the adjuster as far as it will go, then I use a come along around the track and to the bucket to hold the idler forward....this should give you enough room to separate the front yoke and get it out. you can also sometimes get the spring to come out of it's perch once the pres...
- Mon Oct 10, 2016 6:14 am
- Forum: Early model JD crawler technical support
- Topic: diesel additives for old equipment
- Replies: 13
- Views: 9790
- Tue Oct 04, 2016 10:01 am
- Forum: Early model JD crawler technical support
- Topic: diesel additives for old equipment
- Replies: 13
- Views: 9790
diesel additives for old equipment
I have searched and read a ton of info about keeping old machines lubricated with the new diesel fuel.
most of the info is quite old now and I am wondering if anything newer is out for additives for the old machines to run on ulsd.
most of the info is quite old now and I am wondering if anything newer is out for additives for the old machines to run on ulsd.
- Mon Oct 03, 2016 2:35 pm
- Forum: Early model JD crawler technical support
- Topic: 1010C counterweights
- Replies: 13
- Views: 8809
I have the counter weights on my loader, but I have a scarifer that has mounts for counter weights built into it. I run 3 weights on it, it came with 5......without any weight the machine is pretty much useless rear end pops up and you spin the tracks trying to fill the bucket. it also puts a ton of...
- Mon Sep 26, 2016 9:56 am
- Forum: Late model JD crawler technical support
- Topic: High crankcase pressure on new rebuild.
- Replies: 16
- Views: 11603
it is not normal to have gaskets weeping oil out during an engine break in period. I have never used a break in oil, always used regular oil that engine called for. I run them up to temp for the first time, for maybe 20 mins or so and shut them down and drain oil and change filter. you have somethin...
- Sun Sep 18, 2016 11:57 am
- Forum: Late model JD crawler technical support
- Topic: Raving for rippers
- Replies: 7
- Views: 5923
- Sun Sep 18, 2016 11:53 am
- Forum: Early model JD crawler technical support
- Topic: 1010 engine issue
- Replies: 13
- Views: 9643
the sleeve o rings will shrink and dry out, sitting for long periods of time with often cause marginal seals to just start leaking. fresh oil and running may get the o ring seals swollen back up again, but most likely anti freeze will continue to leak in and running it will result in destroyed beari...
- Mon Sep 12, 2016 6:00 pm
- Forum: Show & Tell
- Topic: John Deere 350D versus Chainsaw
- Replies: 5
- Views: 7432
- Sun Aug 28, 2016 7:11 pm
- Forum: Late model JD crawler technical support
- Topic: 410 Screen Filter
- Replies: 3
- Views: 3699
- Mon Aug 22, 2016 6:07 pm
- Forum: Late model JD crawler technical support
- Topic: 450c track problem
- Replies: 5
- Views: 4947
should be able to get adjusters out without splitting track. collapse the adjuster to get grease to come out and make some room for yourself to work. now you need a way to pull front idler forward...I have used a come along hooked to the bucket or blade and tighten it up to hold idler forward to tak...
- Wed Aug 17, 2016 4:18 pm
- Forum: Late model JD crawler technical support
- Topic: some GOOD news on a 450C
- Replies: 4
- Views: 4057
- Mon Aug 01, 2016 6:14 pm
- Forum: Late model JD crawler technical support
- Topic: 350 CE Wide Pad Questions / With Pictures ** NEW UPDATE
- Replies: 46
- Views: 40895
- Mon Jul 18, 2016 5:49 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 fuel system bleeding
- Replies: 1
- Views: 2084
1010 fuel system bleeding
changed out the starter on a 1010 diesel and replaced fuel lines and bled the filter assembly and engine is still not running smoothly. didn't try bleeding by cracking the injectors lines...ran out of time and had to leave it until this weekend. looking for some help or tips on getting the remaining...