Search found 855 matches
- Sat Feb 16, 2008 10:54 pm
- Forum: Late model JD crawler technical support
- Topic: PTO or Winch drive???
- Replies: 2
- Views: 4546
It is a 1000 rpm spline but the PTO runs at around 800 rpm on a 350 and closer to 900 rpm on a 450-550 machine .Before we had many 4x4 tractors around or selfpropeled harvesters When it was wet in the fall of 84 the 550 was new.We had over 20 inches of rain one month and the fields were just slopin ...
- Thu Feb 14, 2008 5:57 pm
- Forum: Late model JD crawler technical support
- Topic: JD350 dozer shifter is sloppy
- Replies: 4
- Views: 4943
- Thu Feb 14, 2008 5:48 pm
- Forum: Late model JD crawler technical support
- Topic: what to do with this? (350 track frames)
- Replies: 6
- Views: 6718
If your frames are that bad look closely at your rollers they are probably eaten out at this point with salt or potash what ever they ran in they look good but the plain berrings inside will soon just vanish so just watch them . Lavoy should be able to get a set of 350 crawler loader track frames .D...
- Thu Feb 14, 2008 8:03 am
- Forum: Late model JD crawler technical support
- Topic: 350 track removal
- Replies: 7
- Views: 8948
Well I bet one has a higher IQ then the other !!Sounds good Lavoy .look for a pin with a dimple or a centerd drill mark some of the tracks from fifteen years ago had a real rounded outer area and most stick out just enough to hit things as the chains and other pins will rattle along different .Or th...
- Wed Feb 13, 2008 9:41 pm
- Forum: Off-topic discussions
- Topic: ND quarters
- Replies: 2
- Views: 4375
- Wed Feb 13, 2008 9:28 pm
- Forum: Late model JD crawler technical support
- Topic: 350 track removal
- Replies: 7
- Views: 8948
- Wed Feb 13, 2008 10:49 am
- Forum: Late model JD crawler technical support
- Topic: what to do with this? (350 track frames)
- Replies: 6
- Views: 6718
The last time I saw one that bad it was up at the salt mine west of me get the modle and we will see if we can get you some I have several wreckers and a guy 15 miles from me sends antique tractors and parts over there all the time .The first banging around they would take they would just disintigra...
- Sun Feb 10, 2008 3:31 pm
- Forum: Off-topic discussions
- Topic: crawlers for hire?
- Replies: 17
- Views: 18543
As a contractor I know if you have to repo you will get respect from the right cliantell .The ones that tell you any different ignore them .I drained a farm for a large operation 7years ago installation and tile on 106 acres of swamp hole and changed it to top dollar farm land I never got paid for f...
- Sat Feb 09, 2008 9:06 pm
- Forum: Late model JD crawler technical support
- Topic: Special Grease Gun
- Replies: 3
- Views: 4613
Bud a standard grease gun will work just fine .A pistol grip gun works great a leaver action works well also but remember not to put all your weight on it as you could push out seals yes but you will have to apply considerable pressure to do that .A common sense approach is needed for this job. In a...
- Fri Feb 08, 2008 11:24 pm
- Forum: Late model JD crawler technical support
- Topic: JD 450C Powershift ?
- Replies: 6
- Views: 7386
- Fri Feb 08, 2008 11:23 pm
- Forum: Late model JD crawler technical support
- Topic: JD 450C Powershift ?
- Replies: 6
- Views: 7386
- Fri Feb 08, 2008 11:14 pm
- Forum: Late model JD crawler technical support
- Topic: backhoe attachment
- Replies: 15
- Views: 34660
If you have the hoe mounts you should also have the big hydraulic pump but remember the 350 is smaller than the 450 and it is hard on a little 350 to run the fullsize hoe around on the back sprockets .Track life and drivetrain punishment are a certain killer to a combination like that .It is super h...
- Fri Feb 08, 2008 10:49 pm
- Forum: Late model JD crawler technical support
- Topic: No serial no at all on 450B
- Replies: 4
- Views: 5730
- Fri Feb 08, 2008 10:42 pm
- Forum: Late model JD crawler technical support
- Topic: JD 550 Steering Question
- Replies: 3
- Views: 6760
Do not tuch the valve you adjust the clutch break adjustment down at the other end of the shaft .The valve should NOT be tampered with in any way .Those little slave valves never work right after and there is adjustment but you do not want to play with that as you get out of wack on both ends of the...
- Wed Feb 06, 2008 11:28 am
- Forum: Late model JD crawler technical support
- Topic: No serial no at all on 450B
- Replies: 4
- Views: 5730
Yes Deere can tell from engine build .Now IF you find the right person around Deere them selves (Notice I said IF ) There is more than one place the s/n is on the late sixtys and newer machines my old 550 had one stamped on the left side frame .I bought a 410 D backhoe several years ago at an auctio...