Search found 119 matches
- Fri Aug 03, 2018 9:24 pm
- Forum: Late model JD crawler technical support
- Topic: Looking at a 350B ...anything you see that says..RUN!!?
- Replies: 16
- Views: 12902
Looking at a 350B ...anything you see that says..RUN!!?
Going to look at a 1971 350B with a 6 way blade tomorrow, which is mainly what we want to transfer to our '65 350 which has a 6310 on it now. The 350B has the 6305 6 way blade, overall it looks pretty crappy but looking past the rustyness, I think the undercarriage is usable, it's supposed to run, b...
- Mon Jul 30, 2018 8:37 am
- Forum: Late model JD crawler technical support
- Topic: Will inside 6 way blade transfer to manual blade machine
- Replies: 2
- Views: 2569
Re: Will inside 6 way blade transfer to manual blade machine
Thanks, in the last few days I managed to find pictures of the mounting points for the 6 way inside blade, now I just need to make a deal on the machine and get it home. Will post some pics shortly.
Thanks
Thanks
- Sat Jul 28, 2018 6:51 pm
- Forum: Late model JD crawler technical support
- Topic: Will inside 6 way blade transfer to manual blade machine
- Replies: 2
- Views: 2569
Will inside 6 way blade transfer to manual blade machine
Well, we found another machine😳👍 and are mainly interested in the 6 way blade it comes with. It’s a 350BE which tells me it came as an inside blade from the factory, s/n tells me 1971. We have a very nice ‘65 350 with the 6310 blade. The machine in question is in pretty rough condition, runs, moves ...
- Thu Jul 26, 2018 8:21 am
- Forum: John Deere crawler FAQ's
- Topic: Roller grease and guns
- Replies: 31
- Views: 2011333
Re: Roller grease and guns
Thanks boys, Well, there are no rubber seals visible on my 2 button head guns, I am going to search the web for pics to see what they look like and where they should be. That could be the problem, the idlers accepted grease just fine as did the upper track roller. I'll also try the awl trick, thanks...
- Wed Jul 25, 2018 7:01 pm
- Forum: John Deere crawler FAQ's
- Topic: Roller grease and guns
- Replies: 31
- Views: 2011333
Re: Roller grease and guns
Thanks Stan appreciate the reply. I think I’ll investigate each gun a little bit further although the one that is painted John Deere green is probably safe to assume that it’s a low pressure gun and that is the superior gun. I tried to set the track tension today and when I put the button head fitti...
- Wed Jul 25, 2018 8:36 am
- Forum: John Deere crawler FAQ's
- Topic: Roller grease and guns
- Replies: 31
- Views: 2011333
Re: Roller grease and guns
Good morning all, I would like to add to this discussion, I found EP-0 NLGI#0 grease at our local ag dealer, after finding out that my main button head gun was loaded with EP2...ooops. Anyway that got me thinking what my 2 button head guns actually are, so into the parts cleaner they went and 10 min...
- Fri Dec 22, 2017 12:32 am
- Forum: Late model JD crawler technical support
- Topic: Rebuilding my IP need some guidance pilot tube depth
- Replies: 5
- Views: 5764
Re: Rebuilding my IP need some guidance pilot tube depth
Good gravy, It's been a year since I rebuilt this an realized I didn't update you on the success... It was a success. :D Just finished plowing the neighbours driveway for the 3rd time in the last few weeks and was thinking how smooth it is now...no missing, stumble or anything. It was a pretty simpl...
- Tue Dec 13, 2016 7:21 pm
- Forum: Show & Tell
- Topic: Look mom no more pulling pins on the 6410 blade.
- Replies: 10
- Views: 15769
- Sat Nov 05, 2016 11:28 pm
- Forum: Late model JD crawler technical support
- Topic: Rebuilding a old manual 6 way (6310) blade
- Replies: 12
- Views: 13428
- Fri Nov 04, 2016 9:45 am
- Forum: Late model JD crawler technical support
- Topic: 350 weight
- Replies: 7
- Views: 7721
- Wed Nov 02, 2016 4:29 pm
- Forum: Late model JD crawler technical support
- Topic: Rebuilding my IP need some guidance pilot tube depth
- Replies: 5
- Views: 5764
Here it is all apart, well as far as I needed to take it apart. I didn't take apart the head end as I didn't need to, but I have had them apart before and it's nothing complicated. Digi pics are a good backup if it's going to be apart for more than a few days. :roll: Cheers http://www3.telus.net/rad...
- Wed Nov 02, 2016 8:55 am
- Forum: Late model JD crawler technical support
- Topic: Rebuilding my IP need some guidance pilot tube depth
- Replies: 5
- Views: 5764
Thanks, I have the same manual but couldn't interpret what they meant, .045 or .315. I found web pictures showing a vast amount of difference so I ended up pressing it in so it is flush on the inside of the housing. It's all back together and runs soooo smoooooth now. Not sure if it was because the ...
- Tue Nov 01, 2016 11:32 am
- Forum: Late model JD crawler technical support
- Topic: Rebuilding my IP need some guidance pilot tube depth
- Replies: 5
- Views: 5764
Rebuilding my IP need some guidance pilot tube depth
Hi guys, Finally getting around to rebuilding the IP on my 1965 350...it's all apart on the bench and have pressed out the pilot tube, but didn't realize the depth was critical and didn't measure it before I removed it. As I don't have the mandrel spacer 16315, could someone please tell me what amou...
- Fri Jun 19, 2015 8:31 am
- Forum: Show & Tell
- Topic: New to me 350C
- Replies: 35
- Views: 43148
Wow! That is a nice restoration. I missed it in 2011, but what a great job! It sure is nice to see a machine all broken down and so well documented. Makes it a lot easier to see how everything fits together. I have a 3310 winch to rebuild, not sure the differences between the 3310 and 3315 but it's ...
- Sat Jun 13, 2015 12:34 pm
- Forum: Early model JD crawler technical support
- Topic: MC fan shaft bearing and seal
- Replies: 1
- Views: 2524
MC fan shaft bearing and seal
Hi guys, Finally found a 6 V generator and went to put it on and found out that the generator belt is a different size need to change that out got into it all removed the radiator and found that the fan shaft seal is leaking at the back. I have the whole fan assembly out now and it looks like there'...