Search found 855 matches

by digitup2
Mon Mar 25, 2013 2:23 am
Forum: Off-topic discussions
Topic: Jake brake, anti-lock brakes, '05 Int'n'l Dump Truck
Replies: 7
Views: 10831

Try your ABS relay Jack I don"t know if it is a five prong or a four prong relay plug but replace it with the same relay unit and see if things change good luck .Digitup.
by digitup2
Mon Mar 25, 2013 2:07 am
Forum: Late model JD crawler technical support
Topic: 650G
Replies: 2
Views: 3423

The 650G is one tough Deere as they go watch the tracks for condition and maybe the finals for stress leaks there are 5 different builds of the 650G and two different drives all are good machines is it a 650G or a 650GTC with the Torque converter.They are both great machines I never had problems wit...
by digitup2
Mon Mar 18, 2013 8:11 pm
Forum: Late model JD crawler technical support
Topic: Questions regarding a 450CA
Replies: 6
Views: 6102

Send photo s of this machine as the A was a European version with the Mannheim motor and a French build machine also had a side fuel tank and operator seat was closer to the back of crawler .Just wondering if that is what the machine is several have been found on this site !!.Digitup.
by digitup2
Thu Mar 14, 2013 8:05 pm
Forum: Late model JD crawler technical support
Topic: History of Roosa-Master pump development
Replies: 1
Views: 2793

very good article !!
by digitup2
Sun Mar 10, 2013 7:48 pm
Forum: Show & Tell
Topic: Snow equipment
Replies: 5
Views: 7270

We don't have much call for pusher's but we keep the three we got busy when that Shit No One Wants fall's the narrower angle blades clean better and in that mall the 18 foot pusher is working on the flat that helps a lot when you are pushing that wide it has a rubber blade and if you do something st...
by digitup2
Sun Mar 10, 2013 12:57 pm
Forum: Show & Tell
Topic: Snow equipment
Replies: 5
Views: 7270

I got two 16 foot pushers custom made that chain hook to the loader then turn them sideways and hook the left side to the right corner of the loader bucket and the right side hooks to the right stabilizer pad and you can take it sideways down the street this dose work good We have a 18 foot pusher f...
by digitup2
Sat Mar 02, 2013 2:12 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: guage
Replies: 46
Views: 48038

Tell me the cost and I will order the set !.Digitup.
by digitup2
Wed Feb 20, 2013 4:31 pm
Forum: Off-topic discussions
Topic: D4H at auction
Replies: 5
Views: 5881

Those tracks are gone the inner rollers are cutting badly onto the bushings so It has had some banging going on run don't walk from that old Cat she has been run hard for quite a while after the tracks were to run out [100% worn out]and it is well beyond that It needs a whole new under carriage at l...
by digitup2
Sun Feb 17, 2013 10:31 am
Forum: Off-topic discussions
Topic: Ammo
Replies: 17
Views: 14107

As a having a small rifle collection my self I get a kick out of the BS and twisted angles the media throws around They don't know sheep shit from cherry pits as I have seen reports on our Canadian gun laws working wonders and being so great these were and are still a crock of shit up untill six mon...
by digitup2
Wed Feb 13, 2013 4:37 pm
Forum: Late model JD crawler technical support
Topic: What Should I Pay for a JD 700H?
Replies: 2
Views: 3748

It's not a bad crawler in nice shape and has several options that will be handy But [and this is a Big but] look on the US side there is a lot of iron on your side of the border in need of a new home look on Market Book there are scads of 700H Deere's in the south I have one of these 700H's and am n...
by digitup2
Sat Feb 02, 2013 8:52 pm
Forum: Late model JD crawler technical support
Topic: 350C I'm thinking buying...
Replies: 28
Views: 22363

The wear on the track and the scrub in the pin tells me someone ran side hill with it a bit lately the chains will be worn a bit but I see none of that banging on the boss's I will try to send a photo to you of a rail boss that is banging on the rollers and it will show you where to look for this bu...
by digitup2
Wed Jan 30, 2013 6:41 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: guage
Replies: 46
Views: 48038

Ralph you should get that reproduced by some one with a CNC cutter they would be a handy tool !.Digitup.
by digitup2
Mon Jan 21, 2013 7:42 pm
Forum: Show & Tell
Topic: My New 350B Crawler/Loader
Replies: 9
Views: 11481

Got many downed trees down there ?.I heard it was a big mess some places .A neighbor of mine works for Ontario Hydro he was on the line trucks down in that neck of the woods for two weeks he said some places there were were just wiped out sorry to see it was such a big mess I should send you down my...
by digitup2
Mon Jan 21, 2013 7:20 pm
Forum: Show & Tell
Topic: My new crawler skates
Replies: 6
Views: 7237

The 200 excavator was several miles down the road at the time it saved the day but the driver got mud to the eyeballs hooking it up .Every thing was going good till he slipped on the track and fell in he was heading for the cab after and got told he was riding in the back of the truck home Folded th...
by digitup2
Tue Jan 08, 2013 8:45 am
Forum: Show & Tell
Topic: My new crawler skates
Replies: 6
Views: 7237

Just as I was thinking of an air bag between the belly pan and a heavy sheet of steel under that .Then when the dozer starts heading down you just air it up and slide it away .Would have saved me a lot of fooling around last week any way! As we discovered Deere 550J dozers are heavier than water no ...