Search found 694 matches
- Sat Feb 12, 2022 12:09 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: ISO Loader forks
- Replies: 8
- Views: 7979
Re: ISO Loader forks
Are you replacing the bucket with forks or getting the ones that slide over the bottom of the bucket and clamp on? Lots of the clamp on type.
- Fri Feb 04, 2022 11:00 am
- Forum: Early model JD crawler technical support
- Topic: Oh crap!
- Replies: 12
- Views: 6997
Re: Oh crap!
Lavoy, that is good to know! When I do use the crawler in the winter it's usually for a couple hours. That happened 3X this fall and winter.
I got into some mud on a hill trying to push a brush pile. It finally got so slick I had to give it up. Spent almost an hour cleaning up the tracks!
I got into some mud on a hill trying to push a brush pile. It finally got so slick I had to give it up. Spent almost an hour cleaning up the tracks!
- Thu Feb 03, 2022 2:50 pm
- Forum: Early model JD crawler technical support
- Topic: Oh crap!
- Replies: 12
- Views: 6997
Re: Oh crap!
You definitely made me nervous ! I did not change oil last fall. I did start the crawler when it was 15 degrees! I guess the bullet missed.
- Fri Jan 28, 2022 11:09 pm
- Forum: Early model JD crawler technical support
- Topic: Master pins
- Replies: 8
- Views: 8750
Re: Master pins
Thanks, ordered one. All my searching for one came down to knowing what to ask for . All I was finding were the pin type.
- Fri Jan 28, 2022 5:34 pm
- Forum: Early model JD crawler technical support
- Topic: Master pins
- Replies: 8
- Views: 8750
Re: Master pins
I have trouble getting it on!
- Fri Jan 28, 2022 11:44 am
- Forum: Early model JD crawler technical support
- Topic: Master pins
- Replies: 8
- Views: 8750
Master pins
Not really the pin, the clip is the problem.
What tool do you use to expand the clip? Where are they available? I have not been able to find anything that looks like it would work.
I manufactured a tool (modified a battery terminal pliers) to put one on but it was marginally usable.
What tool do you use to expand the clip? Where are they available? I have not been able to find anything that looks like it would work.
I manufactured a tool (modified a battery terminal pliers) to put one on but it was marginally usable.
- Sun Jan 23, 2022 3:20 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 3pt
- Replies: 3
- Views: 2771
Re: 1010 3pt
My brother had an ag 1010 with a 3pt. I tried to get it from him. Pretty sorry worn out condition. I don't know what happened to it.
- Tue Jan 04, 2022 8:44 pm
- Forum: Off-topic discussions
- Topic: Snow!!
- Replies: 3
- Views: 13120
Snow!!
Lavoy, you'd love it here now, 2 ft of snow! I've had to push berms out 2 times to keep a driving lane in my 1\2 mile driveway. Snow off my roof is over 5' high now. My 420 will be pushing snow again tomorrow! Problem.... A couple days back I need to do snow pushing. It was very cold, been in low si...
- Fri Nov 12, 2021 11:12 pm
- Forum: Early model JD crawler technical support
- Topic: steering clutch wont disengage
- Replies: 9
- Views: 6799
Re: steering clutch wont disengage
I've owned 3 Cats, D2 and 2 D4s. I now have a couple of 420s and a parts machine. The steering clutches are NOT the same. I did use a couple gallons of solvent in one of the D4s to free up the steering clutches and drained out a bunch of rust. This will not work on a JD. It might end up costing you ...
- Tue Nov 09, 2021 4:27 pm
- Forum: Early model JD crawler technical support
- Topic: Oil and oil recommendations
- Replies: 11
- Views: 12939
Re: Oil and oil recommendations
My gear type, 1956 420, gets oil from the transmission. No separate oil fill. If you ever work on it, put at least a cup or more of oil in it before final assembly with the transmission. If left dry, it won't get oil quick enough to prevent damage.
- Mon Nov 01, 2021 5:28 pm
- Forum: Early model JD crawler technical support
- Topic: Rear PTO and 3 Point hitch questions
- Replies: 8
- Views: 5418
Re: Rear PTO and 3 Point hitch questions
I put a PTO on my 420. Simply remove the cover where the PTO goes and bolt it on. I did put new seals in the old unit before putting it on and generously lubed it too.
- Mon Oct 18, 2021 9:52 am
- Forum: Early model JD crawler technical support
- Topic: 420c steering to the right...
- Replies: 15
- Views: 9409
Re: 420c steering to the right...
Is it dragging on one side or possibly slipping on the other? Might want to check the other side!
- Sat Jul 31, 2021 5:54 pm
- Forum: Show & Tell
- Topic: It's coming together, part V, hybrid 3 pt hitch?? DONE!!!!
- Replies: 16
- Views: 43057
Re: It's coming together, part V, hybrid 3 pt hitch?? DONE!!!!
It doesn't have any sway chains. Where the arms attach, there is only a limited amount of side movement. I didn't see a need for them.
- Mon Jul 12, 2021 5:16 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 master link
- Replies: 2
- Views: 3926
- Mon Jul 12, 2021 5:15 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 master link
- Replies: 2
- Views: 3926
Re: 1010 master link
Assuming you looked on both sides, look for a weld.