JDcrawlers Messageboard

Welcome to the board. FYI. Your post will likely get moved to the Late Model Crawlers Board, as that is where these type questions belong. First I would recommend you purchase the Operator's and the Technical Manuals for your machine. For the most part you will not find free Operator or Service/Tech...

Hearing that this fixed it and it is running will be enough. We all learn from each other and have made our share of brain cramp errors, even when we know better (whether we admit them or not). This error with gasket placement is common, you are in a lot of good company on this one. In the future, t...

I wish I had more to offer. The best I can say is I have seen a few at some of the mills around here in years past. They were/are used for clean up of small areas the full size loaders can't get into.

Good morning rolandj, Sorry but I don't see any profile on any of your posts toady that says you have a 350. I feel it is easiest for people reading if one starts out in the post saying what they are working on. Sometimes profiles don't get updated when people change machines or it doesn't show up a...

jsal is right. The dealer price for the radiator hoses is not out of line to get the correct molded hoses. A 450C should have two oil coolers you should change hoses on while the radiator is out. The transmission oil cooler needs the hydraulic/oil rated hoses as jsal posted. Heater hose will fail if...

Someone will correct this If I'm wrong. I believe a 440IC (gas) had the serial tag on the left side of the engine clutch housing. The serial number tag on the 440 ICD (diesel) was on the console below the dash, right in front of the operator. On the 1010s, the serial number tag was on the right side...

As Lavoy said the grouser leads. The wide part of the chain link leads, the two notches in the pad in front of the grouser should match the narrow end of the link ahead of the grouser. From a photo you posted, on your eastovershoe site, of the left track on the crawler having a com-a-long above the ...

The transmission has reverse in it, separate from the reverser.

Keep watch of Craigslist (maine and NH), Uncle Henry's, and Facebook Market Place (if you do Facebook). It seems like 420 parts crawlers appear quite often. Someone in Wellington has a steering clutch on Craigslist Heavy Equipment right now. Say they have some other parts, doesn't say anything about...

If you don't get the manuals from Lavoy or new from JD (they have a bookstore where you can buy them without going to the dealer https://www.johndeeretechinfo.com/ ), look for used originals. You are likely certain you have a straight 450, but be sure of your model and serial number as the manuals a...

This site has a dedicated picture server. You can read about it on the Message board Q&A and Announcements Board when you are logged in. You need to email Lavoy (postmaster@jdcrawlers.com) and get a log in set up for that site. You can set up an album there to store pictures. Pictures stored there c...

If you decide to replace them. check with Lavoy on the discs, he might have or be able to get those. I think those are easier replaced than relined. The brake band relining would be an viable option for it, Lavoy might have a source for that as well if you don't. He may be able to get the seals as w...

Send Lavoy an email (postmaster@jdcrawlers.com). I expect he will have everything you need.

450C Crawler serial number 226968 looks like it makes it a 1975 machine, by the serial number list on the FAQ Board. That would be likely if it was purchased in early 1976.

Welcome. I will start by saying I have no experience with the 755 hydrostatic drive. I have been around other hydrostatic systems and know proper and clean hydraulic fluid and filters are critical, so changing filters and cleaning any suction screens can't hurt. I would recommend you stay with the f...