Can't find it, but it is 74 at the end instead of 72.
Lavoy
Search found 10801 matches
- Fri Sep 08, 2023 7:30 am
- Forum: Early model JD crawler technical support
- Topic: 420C Rubber Tracks?
- Replies: 12
- Views: 15034
- Wed Sep 06, 2023 9:11 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350C Brake bands
- Replies: 2
- Views: 3620
Re: JD 350C Brake bands
Very highly unlikely that someone can reline the wet brake bands, but it's possible. Usually you don't see many rebuilds on the wet clutch crawlers, so if yours are worn, you may have other underlying issues.
Price you are seeing on bands, and the freight seem high to me.
Lavoy
Price you are seeing on bands, and the freight seem high to me.
Lavoy
- Wed Sep 06, 2023 9:09 pm
- Forum: Early model JD crawler technical support
- Topic: JD 420c Crawler Hydraulic System
- Replies: 8
- Views: 9637
Re: JD 420c Crawler Hydraulic System
I would GUESS that your setup would be at 1500PSI which if I am correct would explain the lack of power. Flow is another factor, you may be down on flow and pressure both.
Lavoy
Lavoy
- Wed Sep 06, 2023 9:08 pm
- Forum: Early model JD crawler technical support
- Topic: 420C Rubber Tracks?
- Replies: 12
- Views: 15034
Re: 420C Rubber Tracks?
There is a set that will work on the 440, figure about $4000 for the conversion.
Lavoy
Lavoy
- Tue Sep 05, 2023 7:56 am
- Forum: Early model JD crawler technical support
- Topic: JD 420c Crawler Hydraulic System
- Replies: 8
- Views: 9637
Re: JD 420c Crawler Hydraulic System
Probably not enough info to give a real accurate answer, would need more info on factory or jobber hoe. But the short answer is if it is already at correct operating pressure, increasing it will just break things. If capacity is not enough, then you need a larger hoe, not more pressure.
Lavoy
Lavoy
- Tue Aug 29, 2023 7:53 pm
- Forum: Early model JD crawler technical support
- Topic: 1010C Radiator
- Replies: 3
- Views: 4726
Re: 1010C Radiator
Crawler radiator is unique to the crawler unfortunately.
Lavoy
Lavoy
- Thu Aug 10, 2023 7:13 am
- Forum: Early model JD crawler technical support
- Topic: 440 vs 1010 Finals
- Replies: 4
- Views: 5124
Re: 440 vs 1010 Finals
Internals are different, some other differences, but I BELIEVE they will work. If you have a diesel crawler, gear ratio will be different.
Lavoy
Lavoy
- Tue Jul 25, 2023 7:05 am
- Forum: Early model JD crawler technical support
- Topic: MC grinding noise
- Replies: 10
- Views: 7880
Re: MC grinding noise
You can't really "see" the front bearing enough from the top to get a good idea of condition. A hardened roller in a bearing never smooths out. Run it and the bearing will fail, or whatever else is feeling rough will fail.
Lavoy
Lavoy
- Sat Jul 22, 2023 2:01 pm
- Forum: Late model JD crawler technical support
- Topic: '68 350B right side final drive removal
- Replies: 12
- Views: 6031
Re: '68 350B right side final drive removal
You do not just arbitrarily add or remove shims, you need to measure the freeplay in the shaft, and adjust for proper preload.
Lavoy
Lavoy
- Sat Jul 22, 2023 1:59 pm
- Forum: Early model JD crawler technical support
- Topic: 1963 JD crawler with reverser
- Replies: 13
- Views: 14666
Re: 1963 JD crawler with reverser
R & R only, there are no new crawler water pumps available.
Lavoy
Lavoy
- Wed Jul 19, 2023 7:55 am
- Forum: Early model JD crawler technical support
- Topic: 420c reverser through the motions
- Replies: 2
- Views: 5134
Re: 420c reverser through the motions
Not unusual, the clutch might be dragging just enough to keep it spinning. Make sure you don't have excess freeplay in the clutch pedal. Can also be the pilot bearing going bad or already bad and spinning the input shaft.
Lavoy
Lavoy
- Sun Jul 16, 2023 9:11 am
- Forum: Late model JD crawler technical support
- Topic: '68 350B right side final drive removal
- Replies: 12
- Views: 6031
Re: '68 350B right side final drive removal
Not positive, but I think you might be able to get by just taking off the cylinder bracket.
Lavoy
Lavoy
- Thu Jul 13, 2023 8:03 am
- Forum: Early model JD crawler technical support
- Topic: jd420 pics
- Replies: 133
- Views: 508566
Re: jd420 pics
Will do.
Lavoy
Lavoy
- Wed Jul 12, 2023 1:42 pm
- Forum: Early model JD crawler technical support
- Topic: Oil on my steering clutchs
- Replies: 5
- Views: 5796
Re: Oil on my steering clutchs
Shoot me an email at postmaster@jdcrawlers.com when you get a chance.
Lavoy
Lavoy
- Wed Jul 12, 2023 8:17 am
- Forum: Early model JD crawler technical support
- Topic: Oil on my steering clutchs
- Replies: 5
- Views: 5796
Re: Oil on my steering clutchs
Normally keep all the parts on hand, I think I have a parts manual on hand too.
Lavoy
Lavoy