Search found 323 matches
- Thu Nov 09, 2006 9:14 am
- Forum: Late model JD crawler technical support
- Topic: Safe to Tow?
- Replies: 3
- Views: 5929
- Wed Nov 01, 2006 11:05 am
- Forum: Late model JD crawler technical support
- Topic: Rock Guards
- Replies: 8
- Views: 11245
rock guards
The guards are the roller guards. Tried both places (tried Wengers a while ago, I live close to them) Still no luck. There was one on ebay but I got sniped at the last minute. Thanks anyway.
- Mon Oct 30, 2006 8:34 am
- Forum: Late model JD crawler technical support
- Topic: transmission breakdown
- Replies: 2
- Views: 5278
parts website
Deere.com has an online parts catalog. Just navigate through construction and then go to parts then parts catalog , the type in your model number
- Mon Oct 30, 2006 8:30 am
- Forum: Late model JD crawler technical support
- Topic: Shift Pattern for 81 350C
- Replies: 2
- Views: 5013
shift pattern
A winch will make a difference, as those machines with a winch will have a reverse gear. Reverse is located straight ahead of 2nd gear. Machines without reverse dont have the slot on the bezel. Also my machine has the pattern on the shifter knob. The pattern should look kinda like below. Hope this h...
- Fri Oct 27, 2006 11:58 am
- Forum: Late model JD crawler technical support
- Topic: JD 350C crawler dozer... or not?
- Replies: 8
- Views: 12623
Serial Number
The serial number you list is incomplete. The first digits indicate if its a loader or not it should read like JD350CB2xxxxT. The letter B indicates that its a loader. Also I thought that 75 machines had a 3152 still. I have a machine with a later serial than that and it has a 3152 in it. Any kind o...
- Sun Oct 22, 2006 7:08 pm
- Forum: Late model JD crawler technical support
- Topic: Rock Guards
- Replies: 8
- Views: 11245
Rock Guards
Any one have (or know where i could buy) rock guards for a 350C Loader? JD Part # AT18872.
-Andy
-Andy
- Sun Oct 22, 2006 7:04 pm
- Forum: Late model JD crawler technical support
- Topic: 350C leaking reverser
- Replies: 2
- Views: 5581
Leak
There are two shaft end caps that support the reverser rear clutch shaft and countershaft. They have an O-Ring around each cap. There is also a seal in the rear clutch support cap. These caps bolt onto studs (older models) or 3 bolts. They have shims under them and set the preload for the reverser b...
- Mon Jan 16, 2006 9:39 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: WANTED: JD 350C or 355D Crawler Loader
- Replies: 0
- Views: 3247
WANTED: JD 350C or 355D Crawler Loader
Looking for a 350C or 355D Crawler Loader, preferably in the northeast area. reply or E-Mail me @ CaterpillarD8RII@aol.com