Welcome, it's an interesting site. TEXAS is a fair sized place, can you narrow it down a little? LOL
Bryce
Search found 758 matches
- Thu Aug 02, 2007 7:38 pm
- Forum: Show & Tell
- Topic: getting dirty in texas
- Replies: 18
- Views: 20227
- Wed Aug 01, 2007 1:03 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: Looking for forks for 2010
- Replies: 1
- Views: 2942
These folks advertise a lot of forks on ePay, the link is to one of their cheaper sets. I have never seen them in person just the auctions on ePay. Don't know if you want this style or want to remove your bucket. Bryce http://cgi.ebay.com/Loader-Forks-Bucket-Forks-Skid-Tractor-Pallet-Fork_W0QQitemZ2...
- Wed Jul 18, 2007 12:13 am
- Forum: Early model JD crawler technical support
- Topic: Hydraulic system filter - need suggestions
- Replies: 2
- Views: 3740
I would try someone like Baldwin Filters ( www.baldwinfilters.com ) If there is a store in your vicinity that sells them you could go look in their catalog and might find a direct replacement. I am using a Balcwin dry paper filter for the air cleaner on my 440ICD. It and a piece of exhaust pipe was ...
- Thu Jun 07, 2007 3:30 am
- Forum: Early model JD crawler technical support
- Topic: MC handles
- Replies: 5
- Views: 5241
- Tue Mar 20, 2007 11:43 pm
- Forum: Early model JD crawler technical support
- Topic: grease gun for button head grease zerks
- Replies: 8
- Views: 9889
- Mon Mar 19, 2007 11:45 pm
- Forum: Early model JD crawler technical support
- Topic: 440ICD will engine still run after?
- Replies: 14
- Views: 13226
Two of the arrows in the picture you posted point to the line and boot I listed the part numbers for previously. You appear to be missing the Rod, governor to injector link (p/n 5121239) and two joint, ball, 1/4" (p/n 5118491) and the jam nuts Nut, hex, 1/4" (p/n 121904). You really nead a parts lis...
- Thu Mar 15, 2007 5:10 pm
- Forum: Early model JD crawler technical support
- Topic: 440ICD will engine still run after?
- Replies: 14
- Views: 13226
The part listed above is actually mounted on the governor and is called; lever, governor throttle speed adjusting shaft. Is that the part you need or the C shaped part that runs thru the side of the head in to the rack? It is 5121240, link, and the rubber boot, that seals the side of the head, is 51...
- Wed Mar 07, 2007 12:41 am
- Forum: Early model JD crawler technical support
- Topic: 440icd
- Replies: 3
- Views: 4164
What I did on mine was; first take the tank off and clean the trash out of the tank and the outlet from the tank. At this time I built a new line over to the filter. and incorporated a shutoff valve at the bottom of the tank. Next I got the correct size element and put it in the filter housing. My t...
- Tue Feb 13, 2007 12:21 am
- Forum: Off-topic discussions
- Topic: John Deere Crawler on ePay
- Replies: 5
- Views: 7330
Lavoy Well it looks like you are goimg to be doing a little bit of travelling. Are your pans to repair it or part it out? Or have to wait to see it in person to decide? If you decide to part it out, what would you want for the complete seat assembly? Apparently my 440ICD/831 has the lowback seat plu...
- Sat Feb 10, 2007 9:34 pm
- Forum: Off-topic discussions
- Topic: John Deere Crawler on ePay
- Replies: 5
- Views: 7330
John Deere Crawler on ePay
Lavoy Have you noticed auction no. 290080475592 ? It is a 440IC/831 half disassembled just about as far across N. Dakota as you can get from you. I had never thought of taking a loader apart like that to get in to work on the engine. Bryce http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=2900...
- Thu Feb 08, 2007 1:07 am
- Forum: Off-topic discussions
- Topic: Temperature
- Replies: 19
- Views: 21444
Temperature
Well Lavoy it has been up around 70 deg the last three days here in Texas but apparently you let a little of the cold back out and tomorrow is only supposed to get to near 50. Were you enjoying it so much you wanted to spread it around??
Bryce
Bryce
- Fri Feb 02, 2007 12:48 am
- Forum: Off-topic discussions
- Topic: Tool Definitions
- Replies: 5
- Views: 7718
- Fri Dec 01, 2006 9:14 pm
- Forum: Early model JD crawler technical support
- Topic: New Member / first post/ Why are the early JD's + ground
- Replies: 30
- Views: 27831
Stan You left out Mr. Gauss and his units for measurement of magnetic fields. I went thru USN Electronic Technician School in 59-60 and they taught strictly electron flow and used Left Hand Rules for the relationship between current , magnetic fields, and motor rotation. Then 20 years later SMU was ...
- Fri Dec 01, 2006 8:59 pm
- Forum: Show & Tell
- Topic: Dyno pics, and no I don't mean the prehistoric type!!!!!!!!1
- Replies: 19
- Views: 93027
- Wed Nov 29, 2006 7:12 pm
- Forum: Off-topic discussions
- Topic: Lavoy, you done went and done it!!!!!
- Replies: 1
- Views: 4081
Lavoy, you done went and done it!!!!!
You lleft the gate open up there and the cold and wind has gotten plumb down here to Texas.... In the 70s the last few days but not now.
Bryce
Bryce