Give me a call, 701-361-1006. You can also e-mail me or PM me as to what you need and I can check on it before you call.
Lavoy
Search found 10812 matches
- Mon May 02, 2005 9:08 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: Ordering Parts
- Replies: 1
- Views: 5289
- Mon May 02, 2005 9:06 pm
- Forum: Early model JD crawler technical support
- Topic: Looking for trans reverser alternative.
- Replies: 3
- Views: 7180
I don't keep them on hand, can have them if about 3 days. Check both clutch packs while you are in there. Type A is not really around anymore. The other recommended fluid is 303 fluid, I think Deere calls it Hy-Gard now, anyhow it is just common systems fluid. Mobil calls it 424, I think IH calls it...
- Mon May 02, 2005 8:53 am
- Forum: Early model JD crawler technical support
- Topic: Looking for trans reverser alternative.
- Replies: 3
- Views: 7180
First question, are you using the main clutch when you shift the reverser or are you operating it when the crawler is still moving without using the engine clutch? You can put in the straight shaft and eliminate the reverser, but to me that ruins the crawler. You will only have one reverse, and you ...
- Sun May 01, 2005 12:29 pm
- Forum: Early model JD crawler technical support
- Topic: Tach
- Replies: 26
- Views: 27348
- Sat Apr 30, 2005 5:21 pm
- Forum: Early model JD crawler technical support
- Topic: 440 FRONT IDLER
- Replies: 9
- Views: 14190
I don't have any new brake bands on hand, just sold the last I had on hand, but easy to get more. I have new and used upper idlers on hand, depends on which you want. I was also digging around and found some front idler brackets for 440/1010, I did not have enough time to bring them back with me, bu...
- Fri Apr 29, 2005 9:59 pm
- Forum: Early model JD crawler technical support
- Topic: 440 FRONT IDLER
- Replies: 9
- Views: 14190
Axles and seals are still available from Deere, I have seals for less. At sometime in the future, I hope to have new axles available, but no idea on when. Side brackets might be current, but last I checked on one, maybe for 420, they were like $750 per side. There is a chance, maybe even a good one,...
- Fri Apr 29, 2005 9:27 pm
- Forum: Early model JD crawler technical support
- Topic: 440 FRONT IDLER
- Replies: 9
- Views: 14190
I seldom have had good luck drilling set screws, I always weld a nut to the broken off part, and then usually they will back out. I am pretty much wiped out of side brackets, I have 2 NOS front idlers left, that is it. All of the aftermarket axles are gone, so that wrecks that idea as well. I do hav...
- Fri Apr 29, 2005 7:21 pm
- Forum: Early model JD crawler technical support
- Topic: All Angle 420?
- Replies: 4
- Views: 7553
- Thu Apr 28, 2005 8:39 pm
- Forum: Off-topic discussions
- Topic: Knocking down trees with a crawler
- Replies: 20
- Views: 30493
- Thu Apr 28, 2005 6:21 pm
- Forum: Early model JD crawler technical support
- Topic: Overall opinon of the new board??????
- Replies: 13
- Views: 18019
- Wed Apr 27, 2005 10:45 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: Engine clutch kits for MC-440
- Replies: 0
- Views: 4374
Engine clutch kits for MC-440
Now available, engine clutch kits for MC-440IC & D. Kits include new clutch disc and throwout bearing, and rebuilt pressure plate, $200 + freight. As of right now, I do not need you old pressure plate core back.
Lavoy
Lavoy
- Wed Apr 27, 2005 10:43 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: Engine overhaul kits for MC-440IC
- Replies: 0
- Views: 4210
Engine overhaul kits for MC-440IC
I have engine rebuild kits for MC, 40, 420, 430, 440IC available. Pistons are available up to .125 oversize, bearings to .030 undersize. Buying in kit form basically gets you the gasket set for free as opposed to ordering individually. Also have can bushings, wrist pins bushings, new guides, new val...
- Wed Apr 27, 2005 10:38 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: NEW, reproduction air cleaner cups and clamps for MC-440.
- Replies: 1
- Views: 4985
NEW, reproduction air cleaner cups and clamps for MC-440.
Now available, new reproduction air cleaner cups and clamps for MC through early 440 gas. Cup is $25, clamp is $10.
Lavoy
Lavoy
- Wed Apr 27, 2005 10:35 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: New thermostats for 420-440 with gasket
- Replies: 0
- Views: 3957
New thermostats for 420-440 with gasket
Now available, new thermostats with gasket for 420,430, 440, and 1010 in 180 degree. I have found this to be the best mix for Summer and Winter use. It helps to keep the condensation out of the oil if you use you crawler in the cold temps at all. Price is $7.50 + freight.
Lavoy
Lavoy
- Wed Apr 27, 2005 10:31 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: NEW, complete tachometer cables for 420-440
- Replies: 1
- Views: 4697
NEW, complete tachometer cables for 420-440
Now available, new tachometer cables for 42,430, and 440 gas, $25 + freight. This is the complete cable, housing and inner cable, ready to install.
Lavoy
Lavoy