JDcrawlers Messageboard

JimB, trouble is 2 things...brake controller is actually built into the dash, at least the levers are visible anyway...i do have a camper trailer which seems to have been wired correctly, at least i know the hand operated lever engages the new brakes i had to put on the camper..not so sure on turn s...

JimB, here we go.... i source directly from the truck female at the rear,,,and facing it from rear o'clock is 3 o'clock is the left turn signal 9 o'clock is right turn signal, i can only assume idjits wiring truck that way, so i wire trlr connector that way no problem..they work.. am not positive ju...

JimB, and others...problem i am having...truck came with trailering package....however i am hooking up my gooseneck and had to rewire entire trailer...their wiring was poor and connector did not work ... now, when looking at truck end,,,3 o'clock is actually the left turn signal and 9 o'clock is the...

have a 2015 gmc all terrain sierra....dam internet diagrams do not match up to what i read off the truck...have the lights running, brake lites,turn signals..and flashers am having problem locating the primary brake wire for the trailer brakes...2 axle trailer w/brakes on both and each has two wires...

that is enough to make a body worry abut needing major repair work....i will need to check my thermostat next time and make sure has that hole..
forgot these ld girls are a bit tempermental

just ha my jd440ic do the same thing recently...had my donor water pump on it at first, so had Lavoy ship me a rebuilt, it did the same thing twice, actually ran temp gauge up to red line and shut her off ..let cool down run it second time, spit coolant out overflow.caught it and put it back in and ...

Thanks to bot you folks, that is a help indeed....have a rental sale coming up with Kubata minis so will be checking to see what all they got.

i really don't trust crags..creeps already showed up with mini...if they won't give address ''don't get involved' crazy creeps

thanks for the heads up!!!

any others out there intimate with problems of other machines?

surprisingly i run my jd440ic on my blacktop driveway, wt at almost 9k lbs and practically new grousers...only damages edge of blacktop when drive off, can even turn it around in center and does not tear it up.. prefer steels on mini ex since work of any consequence would obviously be mud and dirt a...

was hoping for few more comments and suggestions. would like something usable and not too spendy and certainly don't want 30k new and small but enough to do smaller jobs, something reparable if needs

don't know for sure if possible but, my jd440c did have a filter in the hard line with fittinggs on each end, i was able to get connectors and save it and of course get the filter out as it did not belong on that line, wonder if can cut out the bad section and get fittings and connect if rest of har...

seller claims to only have 327 hours on the meter, which makes me very leary of even wanting to go the 5 or 6 hrs away to look at it. from pics it does look like in fine shape....none of the "sherwin williams" on it. tracks look to be good shape, can see wear traffic on pant, seat appears worn a bit...

what do any of you folks know about these mini excavators? believe one am looking at is made in the 90s, are parts readily available and not too spendy? is hydraulics. rubber tracks. what do i need to look for on theses? is smaller believe less than 5000lbs so won't really do bis jobs, would think t...

that kinda depends on what is life of the steering brakes? and if you got hl's to work on or around....these machines will roll very easy on slight grade. you can use both hand brakes and clutch to stop it but still have to shut it off.

where are you located??????

KellyBeans,
by the way at the login drop down box is access to your profile...that is where you can put in info as to your 'location' ,,it helps others to determine if access to help may be closer than you may realize,