JDcrawlers Messageboard

Hi Bill and Lavoy do you have a part number for the afore mentioned radiator. There is a neighbor who said he could get a radiator for anything,sounds to good but might be worth a try. He also rebuilds starters and gen/alts too. Dean

This an update from the January post. 350 for sale 14EID 013765T. Number on insterment panel SNE 7350000527U. Hour meter 3935 ? 12 inch street pads 66inch bucket with 8 teeth. 4speed w/ reverser. 5roller ,no weights,no cracks or welds noticable. Exc tin, engine side guards exc. water ,oil and amp ga...

I do believe you are correct Lavoy. Someone wants to make some money fast. There is a place up here that can get any one a person needs Kaman Bearing. Still cold at your place Lavoy -20 below here for the last three night with the wind even worse.

My neighbor has a 350 track loader for sale. Year unknown. I have seen it will get more info and submit it on here for anyone that might be interested. It is running. Will get serial number to check year.

1 430c working on it.

There could be other issues that are unforseen. Someone had the left side apart track is out of adjustment and left steering clutch is stuck.They cracked the bolt hole where the fender bolts on.With the cold weather here it will be spring before anything will be done. The tracks were not adjusted co...

Hi Lavoy; Did some checking on my 430c. It seems that it was used real hard. I have 24" between the five track pins (not good). On the track frame where the front idler sits, it's worn about half way through. Front idlers are worn on one side, track tenisioners have about 2" inches left on the end.C...

larry you are right on with the tools.One thing more about the hammer is the words after you hit the fingers or thumb. OUCH

thanks Lavoy, This is an older hough had a gas engine and changed to a 3-51 detroit. Dresser dosen,t have and thing for it. This would possibly be a junk yard item or one in the back forty. Dean

Does anyone know where a part for a hough 4 wheel drive rear steer loader cam be found. The piece is the short shaft in the wheel with the hub ,similar to a 4 wheel drive pickup.This has 6 large ball s inside the size of a quarter.most pettibones were set up the same. Thanks

Question on a Mccormick-Deering Do all w-4 have the two guages mounted in the hood? Or is this a different model. thanks

yes a knlfe did the job, not before the bloody finger and knuckle. thanks. Dean

thanks Lavoy , This a nice clean site that you have here. Very enjoyable.Another question is the belt for the fan to the harmonic balancer. How does one get it on? Does it have to do with the allen set and the bolt? thanks Dean

I will have a lot to learn. It will just take a lot of time and $. Keep me out of trouble except with the wife.I get the same as everyone else another piece of junk in the yard.Is it easier to pull motor and bell housing together or seperate? I have a lot to do left side has been apart not long ago ...

Hi all; I'm a new member, have a 430c. I have read a few of the forums and don't see many 430c in the topics. Are they rare or just worn out and junked. Mine is a 4 roller with 5 speed reverser with a 62 blade. Currently have the radiator, grill and guard off.Going to pull the motor as it is stuck.I...