JDcrawlers Messageboard

thats neat i wounder how or what was used for final drives and how they were attached. almost had to use the 60 tranmission?..... that 1010 or 2010 uc?

i was seeing the "convex" sprockets and the cross bars are not extended to accept the wider normal spacing

i found this on youtube, a narrow mc pulling a binder.

http://www.youtube.com/watch?feature=en ... cxBEY&NR=1

very nice!!.....ps. i want the blade! lol

im bound to make this thing work! not really worth it but i am! lol. im slowly picking up on it. i understand the shaft but i could not see what the bands were pushing against on the spider. what is the purpose of the two bands?

i apologize for the dense moments!

ok i got that, thanks. what engages the spider?

or does the slave 'ear' push against the spider when applied?

does the clutch slave 'float' on the spider?, then bolts in the spider (pockets in the bands) drive the drum? when chutch is applied?

sorry for the lack of better words

try some compressed air to make sure the valves are seating too.

would you happen to have a brake slave?

yes that does make sense thanks. i got some parts, trying replicate others. i read through the manual again. found out that there are 2 tubes, 1 with the spring and adjuster to hold tension on the band, to help create brake action (thats on the bottom). the 2nd tube comes from the slave to break the...

gregjo1948, you aready sent me one. ;) thank you. i found the drawing and operation instructions alittle vague, had to read it several times to understand it, and trying to visulize the functuon of missing parts, mainly the brake rod springs and tube and how it contacts the band. i found some parts ...

think i got the mechanical advantage of the brake figered out, it dont need to be relesed when the winch is powering in. when cable is pulled out or on, it natrally wants to pull tighter along with the spring pressure, then the slave releases it to free spool..... rite???

so what makes the clucth not engage when brake is released if lines are tied together..

dose the spring apply the brake then the slave cylinder release it? so when you apply the clutch, the brake slave releases brake, for power in. then when the clutch released, brake cylinder also released,spring presure applied brake is on. to free spool release break by pressure to the brake cyl. bu...