Search found 212 matches
- Fri Jun 08, 2012 6:50 am
- Forum: Late model JD crawler technical support
- Topic: 350 straight clutch adjustment
- Replies: 6
- Views: 6939
Hi ! Fluid would be one of your worst enemy !!!! the only way that I know to make the adjustment is via the manual and I know it is a tad bit akward at first to understand (my mother tongue is french) . what I do on mine is to blow air via the drain plug hole and I put the vaccuum on top to pick up ...
- Thu Jun 07, 2012 7:34 pm
- Forum: Late model JD crawler technical support
- Topic: 350 straight clutch adjustment
- Replies: 6
- Views: 6939
operate the machine a bit open the covers and look inside with a light and mirror and try to look if there is anything suspicious in there , get the manual to adjust the steering clutch accordingly to the manual ( you might have to read two three times ) then do a run test again before you close the...
- Thu Jun 07, 2012 11:51 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: Parting out 440 gas crawler
- Replies: 11
- Views: 8657
- Wed Jun 06, 2012 8:04 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350 loader crawler info needed please
- Replies: 6
- Views: 6600
- Thu May 31, 2012 6:28 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 350B loader.GOOD front idlers needed
- Replies: 4
- Views: 5891
Hi ! I f you can't find front idler and you afre not using the dozer for a living I had my front idler external center reduce by plasma cutting and it work just fine as it does not touch the bushing anymore , I still want to buy new idler soon in case but at least I can use the dozer . http://i15.ph...
- Thu May 31, 2012 6:18 am
- Forum: Late model JD crawler technical support
- Topic: JD 350 loader crawler info needed please
- Replies: 6
- Views: 6600
- Mon May 28, 2012 6:21 am
- Forum: Late model JD crawler technical support
- Topic: JD 350 loader crawler info needed please
- Replies: 6
- Views: 6600
JD 350 loader crawler info needed please
Hi ! I have someone that I know looking for info : what year would this crawler is : http://i15.photobucket.com/albums/a351/towoc999/dozer/P1070298.jpg here is the serial no: http://i15.photobucket.com/albums/a351/towoc999/dozer/P1070306.jpg also I think that the top roller holder is casting so weld...
- Thu May 17, 2012 7:48 am
- Forum: Early model JD crawler technical support
- Topic: Calling all weldors
- Replies: 36
- Views: 26097
Hi ! To include text or graphic ( read arrows) . 1- save the pic you want on your computer 2- open it with PAINT or paintbrush or any other editing program 3- insert what you want 4- save it back on your computer 5- dowload it to a picture hosting site ( like Photobucket ) 6- copy it as a link into ...
- Wed May 16, 2012 11:31 am
- Forum: Late model JD crawler technical support
- Topic: 350 staight in garage for preventive maintenance
- Replies: 36
- Views: 35294
Hi ! The deer is out of the garage and ready to push dirt !! it is been a long quest but how rewarding that NOTHINGs leaks anywhere and all is working great !!! I'm proud of myself and now let's hear that nice diesel sound and push dirt !! thank you for all the help . http://i15.photobucket.com/albu...
- Wed May 16, 2012 11:05 am
- Forum: Early model JD crawler technical support
- Topic: Calling all weldors
- Replies: 36
- Views: 26097
Hi! so next step is to remove the spring pin ( picture one ) http://i15.photobucket.com/albums/a351/towoc999/dozer/zzpic_1.jpg then clean thread head of the pin then screw a nice clean long bolt in there with a nut thru a big socket to create a puller and try slowly and gently to pull out the pin an...
- Tue May 15, 2012 5:20 am
- Forum: Early model JD crawler technical support
- Topic: Calling all weldors
- Replies: 36
- Views: 26097
- Mon May 14, 2012 6:43 am
- Forum: Late model JD crawler technical support
- Topic: JD. 350b final drive
- Replies: 1
- Views: 2595
Hi ! I do not know the specs on 350B for disk , but are you sure all is good ?? check the pressure plate to find if all the clutch fingers are working properly , Is the thowout bearing still turning properly ?? Is the clutch fork actuator is working free ?? is the disk all rusted ans pitted ? is the...
- Tue May 08, 2012 5:44 am
- Forum: Off-topic discussions
- Topic: Making accesories for my Clausing 6903 Lathe.
- Replies: 14
- Views: 14272
- Tue May 08, 2012 5:42 am
- Forum: Show & Tell
- Topic: Saved from the scrapper 1010 nice undercarriage!
- Replies: 7
- Views: 10148
- Mon May 07, 2012 10:17 am
- Forum: Late model JD crawler technical support
- Topic: water in oil any trics to remove it ?
- Replies: 6
- Views: 5845
HI ! I meant the hydraulic oil tank , here is a pics of my oil which I think it is contaminated with water. http://i15.photobucket.com/albums/a351/towoc999/dozer/DSC00314.jpg http://i15.photobucket.com/albums/a351/towoc999/dozer/DSC00315.jpg but if I have to put the cord absorbant I will have to rem...