Search found 130 matches
- Tue Jul 10, 2007 3:39 pm
- Forum: Early model JD crawler technical support
- Topic: Opinions on Unloading a Transported "Problem Child"
- Replies: 19
- Views: 16649
Never done it with a crawler as big as the 2010 but the pipe and board method works on the 40/420 crawlers. But sometimes the pipe will sink if you don't have a lot of them to distribute the weight and you are not on hard ground or concrete. You can literally push it by hand on the trailer so make s...
- Thu Jun 21, 2007 11:30 am
- Forum: Early model JD crawler technical support
- Topic: 420C Steering Clutches
- Replies: 2
- Views: 3874
- Tue Jun 19, 2007 7:27 am
- Forum: Early model JD crawler technical support
- Topic: 40C charging
- Replies: 6
- Views: 6556
- Thu Jun 14, 2007 7:41 am
- Forum: Show & Tell
- Topic: My "new" JD 420C loader...
- Replies: 1
- Views: 4823
- Fri Jun 08, 2007 11:56 am
- Forum: Early model JD crawler technical support
- Topic: new AM2011T price?
- Replies: 18
- Views: 18260
- Thu May 31, 2007 2:14 pm
- Forum: Early model JD crawler technical support
- Topic: JD40C serial number ?
- Replies: 5
- Views: 5452
As I understand it - Yes you're SOL. That is why they want the dealer or sales rep to place the tag on the unit. So they can verify that you have what their records indicate that block belongs to. I think there are some legal reasons. Theif identity, etc that also come into play here as well. So the...
- Thu May 31, 2007 12:31 pm
- Forum: Early model JD crawler technical support
- Topic: JD40C serial number ?
- Replies: 5
- Views: 5452
I hear, you can get the block number off the engine, go to your friendly local John Deere dealer and they will send it off to Mother Deere who will look it up and create you a new serial number plate. It will have bar code symbols on it, which I think looks terrible but, you'll get the serial number...
- Wed May 23, 2007 12:26 pm
- Forum: Early model JD crawler technical support
- Topic: John Deere 420 Crawler not Starting
- Replies: 11
- Views: 11645
- Fri May 11, 2007 3:30 pm
- Forum: Show & Tell
- Topic: Plow day pics
- Replies: 9
- Views: 12226
- Tue May 01, 2007 10:05 am
- Forum: Show & Tell
- Topic: 40c pics
- Replies: 2
- Views: 5450
- Mon Apr 30, 2007 7:32 am
- Forum: Early model JD crawler technical support
- Topic: New JD40c owner
- Replies: 3
- Views: 4168
Distance from the shop is in directed proportion to the severity of the breakdown. It is very important to keep all the UC fasteners tight. Frame clamps especially but anything joining rollers, idlers and sprockets too. If it get motion in it that it wasn't designed to have, things break. Good luck!
- Mon Apr 23, 2007 2:30 pm
- Forum: Early model JD crawler technical support
- Topic: New JD40c owner
- Replies: 3
- Views: 4168
- Mon Apr 23, 2007 2:24 pm
- Forum: Early model JD crawler technical support
- Topic: My new toy 420c
- Replies: 2
- Views: 3587
Wade, Some spotting features to look for on the 420. If it has a oil fill hole on top of the hood and below and to the front of the distributor, it a late (58). Gated shifter should be a 57 or 58. Ungated - 56. and the plate location (or where it should be) that chickenman mentioned. If it's a 5 sp ...
- Tue Apr 03, 2007 8:29 am
- Forum: Early model JD crawler technical support
- Topic: Decal placement
- Replies: 2
- Views: 3331
- Mon Apr 02, 2007 9:02 pm
- Forum: Show & Tell
- Topic: pics of my 1010C
- Replies: 6
- Views: 8126