Search found 115 matches

by Steven Walters
Tue Oct 03, 2017 5:42 pm
Forum: Early model JD crawler technical support
Topic: 420c steering clutch issue
Replies: 11
Views: 9453

Re: 420c steering clutch issue

Its actually pretty easy, make sure you have correct tool to set pressure plate. And good tech Manuel.
by Steven Walters
Mon Sep 11, 2017 12:41 pm
Forum: Early model JD crawler technical support
Topic: John Deere 420 C
Replies: 25
Views: 17182

Re: John Deere 420 C

I have bin trying trust me. Where does shaft from trans to engine come apart? I was going to pull trans and finals off, then take the front half and pick up off cross members.
by Steven Walters
Sun Sep 10, 2017 6:58 am
Forum: Early model JD crawler technical support
Topic: John Deere 420 C
Replies: 25
Views: 17182

Re: John Deere 420 C

My brake and clutch pedal are rusted together as well, I need to split crawler for sure. What is most efficient way to split? In parts book it looks like there is a spring on shaft on the inside, You would think it's broken worn out by now. Do I have to remove shaft completely from machine to clean ...
by Steven Walters
Thu Aug 24, 2017 7:45 pm
Forum: Early model JD crawler technical support
Topic: JD Lindeman Tool Carrier
Replies: 3
Views: 3762

Re: JD Lindeman Tool Carrier

I was wrong really nice lindeman with tool carrier went for 7,500 out of NH auction
by Steven Walters
Sat Aug 19, 2017 8:04 pm
Forum: Early model JD crawler technical support
Topic: JD Lindeman Tool Carrier
Replies: 3
Views: 3762

Re: JD Lindeman Tool Carrier

If you really want a tool carrier look around and find a good one. There are auctions all over the US that have Lindemans with tool carriers on them. Depending on condition you should be able to pick one up for 8,000$ and up.
by Steven Walters
Fri Aug 11, 2017 6:36 pm
Forum: Early model JD crawler technical support
Topic: 3pt toplink lengths
Replies: 4
Views: 4316

Re: 3pt toplink lengths

I have an extra top link if you would like the correct center link,
by Steven Walters
Wed Jul 12, 2017 7:19 pm
Forum: Off-topic discussions
Topic: NY Expo
Replies: 0
Views: 2562

NY Expo

Anyone go to Canadagua?
by Steven Walters
Sun Apr 16, 2017 9:25 am
Forum: John Deere crawler FAQ's
Topic: 420 crawler serial numbers and production figures
Replies: 14
Views: 155987

LP

Any LP crawlers ever built?
by Steven Walters
Mon Feb 13, 2017 8:05 pm
Forum: Early model JD crawler technical support
Topic: 2010 crawler parts machine
Replies: 11
Views: 10890

What kind of shape is it in? How much do you want for it? What is left of machine?
by Steven Walters
Sun Feb 12, 2017 10:10 am
Forum: Early model JD crawler technical support
Topic: 2010 crawler parts machine
Replies: 11
Views: 10890

2010 parts

Any 3pt parts? Rear belly pan?
by Steven Walters
Fri Jul 29, 2016 7:40 pm
Forum: Show & Tell
Topic: 140 with tracks
Replies: 3
Views: 5701

140 with tracks

Would someone please guide me to the garden tractor with tracks and how they did it. Thought it was a 140 garden tractor???? And I thought. I saw it on this forum. I need to build it! TY
by Steven Walters
Wed Jul 27, 2016 8:34 pm
Forum: Off-topic discussions
Topic: Semi-Truck Weight
Replies: 12
Views: 10383

80,000 pounds combined is the max with 5 axles, and no permits. I think with permits I can run just under 100,000 with 5 axles, depends on tire size, or I should say per square inch of rubber on the ground. 900 pounds per square inch I thought it was. Each state varies but bridge formula is simaler....
by Steven Walters
Sun Feb 07, 2016 7:27 pm
Forum: Lavoy's Little Shop O' Deeres
Topic: MC's in for parts
Replies: 7
Views: 8106

Need sod pan. Have one?
by Steven Walters
Fri Dec 25, 2015 6:54 pm
Forum: Early model JD crawler technical support
Topic: Hydraulic problem
Replies: 5
Views: 5225

Sounds like there is an issue with spool. Flow meter and gauge should be able to find problem.
by Steven Walters
Thu Dec 24, 2015 9:29 pm
Forum: Early model JD crawler technical support
Topic: Track pads
Replies: 14
Views: 10280

I have them on a lindeman.