JDcrawlers Messageboard

There are not a lot of kits available any more, but the indicidual parts are.
Lavoy

Listing this for a friend. 420 crawler, 4 roller, Gearmatic blade, runs and drives well, $4500OBO. Contact me for more info or to get in touch with the owner.
Lavoy

Here is the contact info.
Ron Overlease
785-425-6355
over@ruraltel.net

I do have some more pics if anyone is interested.
Lavoy

Herb,
No problem, just need your info. Give me a call when you get a chance.
Lavoy

I am listing this for someone else, so I can not really tell you much about it. They are asking $5000. I will add their contact info as soon as I get it.
Lavoy

Herb,
Resistor should only be for dimming the headlights. On an MC, it will control charge rate, but a 40 has a voltage regulator and should not use the ignition switch for that function.
Lavoy

I would doubt that they are the 440/1010 sprockets, my bet would be that they are 350 sprockets. There is no source that I know of or can find US or foreign for the T16259 sprocket.
Lavoy

I can make you a new crank adjustable link for about the same price as just the handle will cost.
Lavoy

I do have some new switches on hand with the resistor if you need one.
Lavoy

Joe,
Just saw this post, sorry.
I have distributors on hand, let me know.
MT and 420 probably will not have any similar parts. MT and MC may have, and I have plenty of MC tranny parts. If you know the gear part number, I can tell you for sure.
Lavoy

I have NOS 420 sprockets on hand, and if you didn't mind cutting them up, you could cut the rim off of them, and then rerim your old late 440/1010 sprockets just like you would do if you switched to 350 rims. I actually have on cut off 420 rim on hand. Someone must have rerimmed a brand new 420 spro...

There is no guarantee that a used engine you buy would be any better shape than the one you have, just is still bolted together. I would rebuild the one you have rather than put in a used engine with an unknown history.
Lavoy

Is there any reason that you can not reuse the old engine?
Lavoy

Should be no problem, I would need to know bearing size and ring size in case it has been bored.
If you want to go deeper into it, I can get rebuild kits with .045 over pistons if you want to bore the deck out.
Lavoy

Not off the top of my head, no, but it would have to be terribly worn to have that kind of effect on things, and you would have noticed that.
Lavoy