I have a 450c mine is very noisy in reverse also not sure were to look but have using possible gear clearance
JIM
Search found 363 matches
- Sun Apr 05, 2020 3:49 am
- Forum: Late model JD crawler technical support
- Topic: Noise in reverse
- Replies: 5
- Views: 4131
- Sun Apr 05, 2020 3:45 am
- Forum: Late model JD crawler technical support
- Topic: 450B problem
- Replies: 40
- Views: 25261
Re: 450B problem
If you fill radiator leave cap off watch for bubbles in neck running at idle most likely head gasket
JIM
JIM
- Sat Mar 21, 2020 4:16 am
- Forum: Late model JD crawler technical support
- Topic: 78 450c won’t turn over but one revolution?
- Replies: 35
- Views: 21296
Re: 78 450c won’t turn over but one revolution?
Sea foam hydra tune is good for moisture removal in oils
JIM
JIM
- Thu Mar 12, 2020 4:26 am
- Forum: Late model JD crawler technical support
- Topic: 78 450c won’t turn over but one revolution?
- Replies: 35
- Views: 21296
Re: 78 450c won’t turn over but one revolution?
had a problem on a three clyinder in a 302 tractor were it would turn over very slowly was the fuel injection pump was full of fine particles I ended up breaking the pump drive shaft as the pump ended up being seized up then it would turn over might try removing your injection pump to see if it make...
- Sun Feb 23, 2020 5:58 am
- Forum: Late model JD crawler technical support
- Topic: Straight 350 filters ?
- Replies: 6
- Views: 4072
Re: Straight 350 filters ?
Have found the best pricing for filters is from the dealer check it out and they are OEM
JIM
JIM
- Tue Jan 28, 2020 4:34 am
- Forum: Late model JD crawler technical support
- Topic: 350 steering clutches
- Replies: 60
- Views: 34111
Re: 350 steering clutches
heili coil thread repair kit available at most auto parts stores or try a longer bolt
JIM
JIM
- Mon Jan 27, 2020 4:17 am
- Forum: Late model JD crawler technical support
- Topic: JD450C third head gasket This is getting old
- Replies: 168
- Views: 170100
Re: JD450C third head gasket This is getting old
Thats a good buy if you need one to get to all original !!
- Sat Jan 25, 2020 3:35 am
- Forum: Late model JD crawler technical support
- Topic: Rotating flywheel for timing on 450c
- Replies: 9
- Views: 6347
Re: Rotating flywheel for timing on 450c
Stan do you have a part # for the engine turning tool ??
JIM
JIM
- Sun Dec 29, 2019 3:43 pm
- Forum: Late model JD crawler technical support
- Topic: Engine will not turn over
- Replies: 5
- Views: 3835
Re: Engine will not turn over
your fuel problem is most likely the injection pump had same trouble on my 450C there is a plastic ring that falls apart to check it out remove timing window and see if it is clean or full of gunk
- Sat Dec 07, 2019 5:15 am
- Forum: Late model JD crawler technical support
- Topic: JD350C question
- Replies: 9
- Views: 7519
Re: JD350C question
after have coupling failure twice i placed hardened 5/16 "cap screws through both shafts and couling using carbide drills from home depot was not easy required cutting hole in top of housing to install bolt after assembly
JIM
JIM
- Sun Dec 01, 2019 12:15 pm
- Forum: Late model JD crawler technical support
- Topic: Straight 450 radiator
- Replies: 3
- Views: 2882
Re: Straight 450 radiator
If your tanks are in good shape take it to a local shop and see what they want to repair another option is Detroit Radiator manufacture of all sorts of cooling systems have facilities all around US have used them for three re cores on three JDs I have best pricing you can ship yours to them and they...
- Mon Nov 25, 2019 4:34 am
- Forum: Late model JD crawler technical support
- Topic: 350B reverser removal from rear
- Replies: 4
- Views: 3839
Re: 350B reverser removal from rear
I have had my 350 apart from both ends left engine in it is supported in the front with the radiator and pump mount and with support from below and took finals off and transmission and reverser out the rear and removed radiator engine and reserver out the front it can be done either way !!!! JIM
- Sat Nov 23, 2019 5:26 am
- Forum: Late model JD crawler technical support
- Topic: JD450C third head gasket This is getting old
- Replies: 168
- Views: 170100
Re: JD450C third head gasket This is getting old
mineral sprits cleans cosmoline off nicely and leaves no residue blow with compressed air
- Sat Nov 09, 2019 4:01 pm
- Forum: Late model JD crawler technical support
- Topic: 350 steering clutches
- Replies: 60
- Views: 34111
Re: 350 steering clutches
now you can place a big bar in the side you got out and force the other one out !!!
JIM
JIM
- Tue Nov 05, 2019 4:33 am
- Forum: Late model JD crawler technical support
- Topic: JD450C radiator hoses, where to find formed hoses
- Replies: 4
- Views: 3772
Re: JD450C radiator hoses, where to find formed hoses
radiator hoses are reasonable right from the dealer and cooler lines need to be return oil lines not heater hose are not oil resistant
JIM
JIM