JDcrawlers Messageboard

i would say yes...believe that shaft is literally driving the machine, as to what oils not sure, would expect that whatever you use as engine oil should be fine, since no clutches are in it now..

Wow that was a bit of a surprise...1 handle steering....my jd440ic serial number is 453440 and i think is also 1960 model....though am kinda glad it did NOT come with the Pilot Touch...

Believe on your friends 1010....that model 63 sound to be for the blade...dozer seriel number should be i think on the engine block.. someone will come along and post correct info as to location.

E.Huffman, my 440c bearing with the new clutch pack from Lavoy, also runs to the end of the slot..actually have to have the flat washer on it to catch and hold the end of the slot...right steering...not replaced and it too is at end of slot...so appears JimB and others would be on target. and YES ta...

seehttp://www.jdcrawlers.com/messageboard/viewtop ... =3&t=13827
Akron, Ohio near

tho driving it mite relate to "domestic" .....rist!!!!

Swany, My 1960 440ic actually ...does have the metal tube running to the head.....it does NOT come from the filter...it is actually off to the left of the filter and appears to come out of the block and up to the head... will see if can get pic off donor block...if you need...pm me and can pic from ...

Just a bit of additional info on accessing pics.. 1...at bottom of board index is Q&A forum, in that is the post for "Instructions for Pic Server"....anyone that is registered for jd crawler site can access and view photos.,, click on http://jdcrawlers.lcent.com:8000/johndeere/ , which opens you to ...

have you looked at my post in the for sale list on this site...is in Lavoys Shop o' Deeres?

Still up for sale

Fishingbucks and JimB...nice pics, those cylinders look identical to mine on my jd440...64 Blade...i actually got two sets of seals and cups for mine for just under $50 from my local hydraulics shop in Akron...tho latest gimmick is they want noe a $100 minimum order!!!! if needed i can get numbers f...

presume you are somewhat mechanicaly able, if you own dozer you will need to be able to work on it... that particular type of hydraulic cylinder is the easiest to work on, lubricate the nuts on those long bolts...you do not want to break them! first get blade solidly in position so that when removin...

Tried accessing the pic server and unable to connect... Notified service and they will be checking....storms probably knocked out service...will advise when up.. thanks dtoots1 EDIT...6/21/21..4:26pm...still down.. 6/23/21 9:04 E.S.T...still down..he out of town..patience 6/24/21 11:19a.m...ditto 7/...

my local carb company redoes mine for around $70..also does starters gens and alternators

Hi Dean,
it helps if you were to add your location to your profile....others may have recommendations for available machines close by...access to profile is in login drop down box..