Search found 160 matches
- Mon Apr 27, 2020 5:35 pm
- Forum: Late model JD crawler technical support
- Topic: 450c 6-way fittings?
- Replies: 46
- Views: 29297
Re: 450c 6-way fittings?
Is that washer thicker than .010”? The thin washers are .010” the washer should be close to .050”.
- Wed Apr 22, 2020 8:08 am
- Forum: Late model JD crawler technical support
- Topic: 450c 6-way fittings?
- Replies: 46
- Views: 29297
Re: 450c 6-way fittings?
You will find problem. I think with hyd systems acting up, right after someone that shouldn’t have been working on the system, because of lack of knowledge, is like playing with a jig saw puzzle with pieces missing or in the wrong spot! Proper parts books, and shop service manual, put all jig saw pi...
- Tue Apr 21, 2020 10:51 am
- Forum: Late model JD crawler technical support
- Topic: 450c 6-way fittings?
- Replies: 46
- Views: 29297
Re: 450c 6-way fittings?
Ok. Good luck
- Tue Apr 21, 2020 8:45 am
- Forum: Late model JD crawler technical support
- Topic: 450c 6-way fittings?
- Replies: 46
- Views: 29297
Re: 450c 6-way fittings?
You will probably find a .010 shim will change hyd pressure 80 to 100 psi
- Tue Apr 21, 2020 8:40 am
- Forum: Late model JD crawler technical support
- Topic: 450c 6-way fittings?
- Replies: 46
- Views: 29297
Re: 450c 6-way fittings?
When you get your new washer, would you measure thickness and post on here, in case someone else has similar problems, it would be for all to see! Also, after you install new washer and your 3 thin shims, and warm oil and pressure test, post on here what is pressure of your system, and if you have t...
- Mon Apr 20, 2020 10:16 pm
- Forum: Late model JD crawler technical support
- Topic: 450c 6-way fittings?
- Replies: 46
- Views: 29297
Re: 450c 6-way fittings?
Welcome to trouble shooting/ adjusting hydraulics !!
Drip cans, soaker pads and wipe up rags are a must have part of ones tool box!!
Drip cans, soaker pads and wipe up rags are a must have part of ones tool box!!
- Mon Apr 20, 2020 7:13 pm
- Forum: Late model JD crawler technical support
- Topic: 450c 6-way fittings?
- Replies: 46
- Views: 29297
Re: 450c 6-way fittings?
Did you try and measure a regular flat washer ?
- Mon Apr 20, 2020 6:30 pm
- Forum: Late model JD crawler technical support
- Topic: 450c 6-way fittings?
- Replies: 46
- Views: 29297
Re: 450c 6-way fittings?
Another suggestion - when you are testing hyd pressures over 300 psi, do not use brass or copper fittings, they won’t stand the elevated pressure and personal injury could result.
- Mon Apr 20, 2020 8:48 am
- Forum: Late model JD crawler technical support
- Topic: 450c 6-way fittings?
- Replies: 46
- Views: 29297
Re: 450c 6-way fittings?
I found a listing for your 450-c on line and believe your hyd pressure is 2250 psi.
- Mon Apr 20, 2020 8:23 am
- Forum: Late model JD crawler technical support
- Topic: 450c 6-way fittings?
- Replies: 46
- Views: 29297
Re: 450c 6-way fittings?
Forgot to say- get a bunch of .010” and install them, if you would rather. Put 5 or so in and try it. All the washer does is make it so you don’t have a bunch of thin shims. I always install thickest shim next to spring, that way spring action over time won’t distort thick shim( it will distort thin...
- Mon Apr 20, 2020 8:16 am
- Forum: Late model JD crawler technical support
- Topic: 450c 6-way fittings?
- Replies: 46
- Views: 29297
Re: 450c 6-way fittings?
The T10649 washer is available on eBay , the thin shim you have should be U10562 and is .010” thick. Get a regular flat washer,( O.D. Of washer should be close to OD of thin shims), ( use a flat washer from your hood or floor plate) measure the thickness, install it, follow my previous post, or orde...
- Sun Apr 19, 2020 7:16 pm
- Forum: Late model JD crawler technical support
- Topic: 450c 6-way fittings?
- Replies: 46
- Views: 29297
Re: 450c 6-way fittings?
You need to find out what the hyd pressure is supposed to be, and at what RPM. Then put a pressure gauge( approx 1000 psi more than what your spec is) and a good gauge, then bottom a function so pressure is max. Record this reading. If it’s low, put in .050 washer or approx,but measure so you know h...
- Thu Apr 16, 2020 6:37 pm
- Forum: Off-topic discussions
- Topic: I Am Afraid of the Answer
- Replies: 17
- Views: 31275
Re: I Am Afraid of the Answer
I would try and start engine with the inj pump that is on it. It may just surprise you, and then run pretty good.
Just my thoughts
Just my thoughts
- Wed Apr 15, 2020 8:26 pm
- Forum: Early model JD crawler technical support
- Topic: 440 ic
- Replies: 5
- Views: 5827
Re: 440 ic
Thanks. If you could, the thickness of the plate would be excellent !
- Mon Apr 13, 2020 3:10 pm
- Forum: Off-topic discussions
- Topic: Feathering Ye Ole Nest
- Replies: 6
- Views: 10115
Re: Feathering Ye Ole Nest
Very nice!!