Search found 18 matches
- Thu Mar 15, 2007 12:17 am
- Forum: Late model JD crawler technical support
- Topic: Steering brake adjustment
- Replies: 0
- Views: 3227
Steering brake adjustment
I installed the left final drive on the 350 dozer and have now used it a couple of times. After 2-3 hrs of use I have very little left steering brake. I adjusted the brakes this morning and used the dozer for an hour or so and before I was done I again had very little left steering brake. When I ste...
- Sat Mar 03, 2007 9:46 pm
- Forum: Late model JD crawler technical support
- Topic: Adjust steering clutch pressure plate in a 350
- Replies: 1
- Views: 5033
Adjust steering clutch pressure plate in a 350
In my first post last week I mentioned the steering/power transmission problem. I pulled the left final drive and sure enough the pressure plate fingers were way out. I adjusted them down about 3/8". Picked up a drawing of the JD7 gauge from the local JD yellow shop and made one out of plastic. Put ...
- Sun Feb 25, 2007 11:17 pm
- Forum: Late model JD crawler technical support
- Topic: 350 Float Detent
- Replies: 7
- Views: 9651
Float Detent
I'm a brand new first time crawler owner. I just acquired a 1969 350 Dozer. It has a tee handle to control the 6 way blade. How do I engage the float function? The manual (yup, I got them)says to engage the float function by using the left lever, but as I said I have the Tee handle. Do I just lower ...