JDcrawlers Messageboard

jag, i have a friend that has the complete rebuild kit for the 450 that i can get cheap, but i dont know if i want another project. it took 2 months to go through my 350. 450s, 450b's, and 450c's around here are 10 to 15k. i seached the net a little, and 450d's in good shape with 6ways are over 20k....

JAG, the 450D is owned by a neighbor just down the road and is a working machine with a outside blade. i have a friend in southern NH with a early 450 with 6way. its got a bad motor, and he doesnt know if he wants to part it or fix it. thats why i was asking if it was possible to put a early 6way on...

thanks guys for the info. i just wanted to know if it was possible to make it fit. the 450D has a winch, rops with limb risers, and just had the undercarriage done. i think hes asking around 9,000.

andrew

i am dropping the price to 9,000 without the 3pt. can deliver in Vt.

hi all, i bought a 350 for work, but turns out its too small. a guy just down the road from me has a 450D with a outside blade. a friend has a 450 with 6way that hes parting out. will the 6way off the early 450 fit the 450D? i really like the 450D, but dont want the outside blade. thanks

andrew

jd 350 diesel with reverser, power steering, power 6 way, 3pt. and pto. new steering clutches. like new front idlers. i replaced 4 rolls and a final drive. 3pt is missing the top link, but i have a case top link that fits. also included is a spare motor and tranny. i am only selling because its too ...

hi keith, where in the northeast are u? if u are close to me i might be able to come look at it as i have the manuals.

andrew

tigerhaze, i just picked up a brochure on the 2010, and it lists the diesel crawlerloader at approximatley 11,668. the operators manual lists the 50 backhoe at approximatley 2,550.

andrew

i have a model 610 blade off a 1010. i believe its complete. asking 500. call 802-485-6258. thanks

andrew

thanks lavoy. they looked close, but i didnt want to take them apart till i found out if they would or not. thanks


andrew

i have a friend who has a 420 with a bad front idler. i have a NOS 1010 idler. will the brackets off the 420 idler bolt onto the 1010 idler? thanks


andrew

i think i have two. one in a bad tranny and one in a complete tranny. i will check today and let u know.

andrew

rick, thats a common problem on the 1010s. u have two options-change the ring gear carrier or shorten the axle. my dad bought a 1010 and it took a while for use to figure out the splines were gone. we ended up having a machine shop cut 2 inches off the shaft otherwise we would have had to take the t...

robert, i have a friend that parted out 3 or 4 350s. i will ask him if he has some.

andrew

i have a friend in southern NH that should have several of them. pm me if lavoy doesnt have what u need.



andrew