Search found 70 matches
- Fri Jun 29, 2018 12:56 pm
- Forum: Early model JD crawler technical support
- Topic: Location information
- Replies: 17
- Views: 66603
Re: Location information
Jason Phelps Two weeks in Spfld, MA, Two middle weeks (approximately) in Corinth, ME. JD 420 C. Saved it from being parted out, and it looks it. But it works!
- Wed Jun 27, 2018 4:05 pm
- Forum: Early model JD crawler technical support
- Topic: 440 4 Sale
- Replies: 12
- Views: 11467
Re: 440 4 Sale
That first post by Kirk Ramsey is on page 87.
- Wed Jun 27, 2018 3:54 pm
- Forum: Early model JD crawler technical support
- Topic: 440 4 Sale
- Replies: 12
- Views: 11467
Re: 440 4 Sale
OK, while searching for info, starting from page 100 and working back, I came across the first post, by my neighbor, regarding the purchase of his 440IC. This is the dozer which is the subject of this thread. Kirk posted some great photos of his new purchase, and I can attest that it looks pretty mu...
- Wed Jun 06, 2018 8:23 am
- Forum: Early model JD crawler technical support
- Topic: Locate by Area
- Replies: 2
- Views: 2798
Locate by Area
I wonder if there is a way to search for members nearby on this forum. Ie, a filter, similar to the one for members names?
- Wed Jun 06, 2018 7:58 am
- Forum: Early model JD crawler technical support
- Topic: 440 4 Sale
- Replies: 12
- Views: 11467
Re: 440 4 Sale
I just spoke on the phone to the owner of this one, it's in Corinth, ME. Nothing wrong with it, he said, I've never met him. He's asking $4000. I'll be in Corinth in a couple days, and will try and take some pictures. It IS a Johnney Popper. (I think he's also selling the land that it's on, and I th...
- Mon Jun 04, 2018 8:00 pm
- Forum: Early model JD crawler technical support
- Topic: 440 4 Sale
- Replies: 12
- Views: 11467
Re: 440 4 Sale
This one's a gasser, "Johnney Popper", as I remember it had a "12 volt cap". It is pretty much covered with a tarp, so I haven't gotten a good look at it. I think the land it's on is also for sale! LOL I will be up there this week, so should be able to get more info, also photos.
- Sat Jun 02, 2018 7:43 pm
- Forum: Early model JD crawler technical support
- Topic: 440 4 Sale
- Replies: 12
- Views: 11467
440 4 Sale
There is a JD 440 for sale in Corinth, ME. Don't know much about it, but heard it works all right. Been sitting a while, don't know if it's been advertised before. Was told asking $5000.00. Anyone interested can post here, call my cell, 413 three four 8 six 0 thirteen, or, find me on FB: Jason Phelps.
- Sat Jun 02, 2018 2:00 pm
- Forum: Early model JD crawler technical support
- Topic: 12 Volt Cap
- Replies: 7
- Views: 5314
Re: 12 Volt Cap
Some good info from you gurus! I had bought the 12 v cap a while back, as it seemed the thing to do. I had seen a 440 with a similar cap. At least t's easier to unhook the rear clip. LOL OK, I did put the original cap back on, and the engine ran well for a few minutes, till I shut it off. It was fir...
- Fri Jun 01, 2018 7:41 pm
- Forum: Early model JD crawler technical support
- Topic: 12 Volt Cap
- Replies: 7
- Views: 5314
Re: 12 Volt Cap
Gonna try again, short and sweet! Why are the towers on a 12 volt distributor cap 90 degrees counterclockwise from those on a 6 volt cap? Also, when changing to a 12 volt cap, do you need to turn the distributor shaft (rotor) 90 degrees, or just the housing?
- Fri Jun 01, 2018 5:37 pm
- Forum: Early model JD crawler technical support
- Topic: 12 Volt Cap
- Replies: 7
- Views: 5314
Re: 12 Volt Cap
I wrote another (long) paragraph and just about finished, when the computer started going nuts. Unresponsive, then adding unrelated pages, blocking JDcrawlers, then finally clearing out my reply. I wonder if anyone has had this problem? I am going to post this message to see if it goes thru, then wi...
- Fri Jun 01, 2018 10:04 am
- Forum: Early model JD crawler technical support
- Topic: 12 Volt Cap
- Replies: 7
- Views: 5314
12 Volt Cap
WHY is the 12 Volt Cap (on my 420) different from the 6 Volt Cap> As I've been running on a 12v battery, I decided to install a 12v cap. Rotated the distributer 90 degrees, and the engine fired right up...on Number 2 Cylinder! This Dozer has run faithfully for the last 4 or 5 (?) years on 6 v system...
- Tue Dec 26, 2017 8:48 pm
- Forum: Early model JD crawler technical support
- Topic: 1957 420C - Pressure in fuel tank
- Replies: 11
- Views: 9677
Re: 1957 420C - Pressure in fuel tank
I know this thread is a year or so old, but a #75 or 78 battery has the terminals on the side, only. These are 12 v, neg ground, but have been working fine on my old 420C.
- Mon Oct 05, 2015 11:13 am
- Forum: Early model JD crawler technical support
- Topic: Gearmatic WinchDrum 8A Questions
- Replies: 39
- Views: 32068
Spline Buildup
Paul, it's been a long time since I was a machinist, but I think a plating shop could build up the splined portion of the shaft. (Or Spider) May be cheaper to find another part.
- Sun Oct 04, 2015 7:44 am
- Forum: Early model JD crawler technical support
- Topic: Gearmatic WinchDrum 8A Questions
- Replies: 39
- Views: 32068
Gearmatic 8A
I think someone posted some info on their homemade controller, using 2 brake master cylinders. My winch is beyond needing a controller, as it seems to be missing many parts. I have adapted a 2" receiver to mount on the towbar, so I could use my 8000# electric winch if I needed to. The winch is mount...
- Sat Oct 03, 2015 7:57 pm
- Forum: Early model JD crawler technical support
- Topic: Gearmatic WinchDrum 8A Questions
- Replies: 39
- Views: 32068
8A Winches
Paul is pretty knowledgeable about these winches! I remember the photos he posted of his 420C restoration. Unfortunately, they seem to have disappeared into the clouds! :-( Back to subject, I had previously written that, even missing parts and a controller, my winch was able to reel in if pulled out...