JDcrawlers Messageboard

jump on jd web sight and look at a part book for your machine also the owners manaul has some good pictues of the t handle

lavoy has new ones give him a call i just got a set from him

many salvage yards all over google the part it will help you find on some hyd shops may have what you need i used ed nash in nh or winggers good luck it out there

I HAD GOOD LUCK BY PUSHING IN THE NEW BEARINGS IN THE FRAME ON MANY CAR AND TRUCK MOTORS IT CAN BE A PAIN IN THE WELL YOU KNOW WHAT IAM SAYING BUT MOVING SLOW IT CAN BE DONE KEEP US UPDATED TO HOW YOU MAKE OUT IF YOU MOVE FOWARD ON SLIDING IN THE NEW BEARINGS

thanks guys i put the piston on my frame machine and pulled it apart didnt want to do any damage now i can work on getting the nut off the rod

hi guys just pulled off one of the lift pistons from my 450 b took off spaner nut pushed back the rod guide and pull out snap ring but i cant get the rod guide out any tricks or tips on this will be helpful thanks

you can take it on and off i about 5-10 min. after you have done a few times but when you see how much better your crawler will work without it on iam sure you to will take it on and off as you need to just did the vavle stack on my 93 hoe and i have had this unit for 8 years very useful machine goo...

hi ken from an old email that we sent back and forth you told me that you are in bedford my house is about 35 miles away i have slide hamers if you would like to try some of the pullers i have let me know i will get all the pullers i have and drive over cary

for 5 years i ran my 450 with the cover open but with 10 dollars for pins and some steel brake lins to make some bushing it work great pain taking off the vavle but you can tear off with some time about 2 hrs it will work the way it should note on the machine no hyd lines removed

ken ford power steering pumps have a pully that needs to be pulled off know that you play with cars to maybe that puller would fit i have many puller from cars trucks and motorcycles not sure when in nh you are but may have some type of puller to help just got that 93 hoe back together to day thanks...

call wenger tractor in pa. ask for bill in used const. parts

my 450 b would not get to float my linkage had a lot of play i pull it apart and repaced pin and i had to make some bushings but now down pressure is easy and it locks in to float

my 450 has it as well it for the tach

I PUT THE GM ONE WIRE SYSTEM IN ALL OF OF MY TOY CARS TRUCKS DOZER THEY MAKE THE SPACERS AND ALL THE BRKT YOU WILL NEED A ON LINE COMP IS WHERE I GOT THE KIT I PUT ONE IN MY 450B 2 YEARS AGO I WORKS GREAT

i think under the bleed a small ball may have fell out look at parts book if you can but i think may be the ball droped