JDcrawlers Messageboard

Good evening everyone. I have an 81 model 350c. I just acquired a 3315 winch for it. All is well, except the hydraulic filter is in direct line with the fuel tank sediment cup. My uncle said they make an adapter kit to move the sediment cup. But I'm not sure how that's possible. Can anyone shed some...

Good evening, everyone. I apologize for not yet posting a follow up. There was really no need until I either hit another snag or fixed the problem. As you all know, at the time of my last post, I had pulled the IP and then found the that IP drive shaft had snapped. I had the pump checked out at my l...

Whoa! Lots of discussion that I'm reading this morning. But you guys are getting my wheels turning. I'll see if I can respond to each one of you without turning this into a novel. LOL. I don't have the complete manual set for this 450 yet. Working on it thought. LOL. I do have one for my 350 and I c...

Thanks again everyone. The heating only occurs when cranking. Afterwards, everything cools off. The solenoid is brand new. Part of the rebuild. Although I'm not discounting that it could be faulty. Remember, though, the overheating issue took place before the starter rebuild. Also the power strip fr...

Thank you everyone for the responses so far. gregjo1948: I switched the battery out with my 350. 350 started fine. 450...same issue. Stan: That was my thinking as well. To create that much heat that quickly, would've melted any smaller cable. I'm not discounting that the starter may be the problem, ...

This is my first time posting here, so be kind. LOL. I have a late model 450C (1976). I recently changed all fluids and filters. I was operating it and it just died, like someone hit the kill switch. I had only used it about 10 to 15 hours after performing the previously mentioned maintenance items....