Search found 10800 matches

by Lavoy
Fri Mar 08, 2024 5:54 pm
Forum: Show & Tell
Topic: JD 420C - New to me
Replies: 5
Views: 457

Re: JD 420C - New to me

Welcome to the club, have fun.
Lavoy
by Lavoy
Thu Mar 07, 2024 8:15 am
Forum: Late model JD crawler technical support
Topic: 350 blade arms packed solid with mud/debris
Replies: 3
Views: 272

Re: 350 blade arms packed solid with mud/debris

I would echo the power washer, done basically the same thing on trackframes on the 2-cylinder crawlers. It works well, just let it soak up and start to disrupt the hardened dirt, and it gradually washer out.
Lavoy
by Lavoy
Mon Mar 04, 2024 12:23 am
Forum: Late model JD crawler technical support
Topic: John deere 350b only cuts one way
Replies: 15
Views: 619

Re: John deere 350b only cuts one way

Same difference, 90% of the clutch parts on ebay are them. I would say junk pressure plate all things being equal. I know their pressure plates, thrown a couple new ones in the scrap dumpster.
Lavoy
by Lavoy
Sat Mar 02, 2024 11:36 am
Forum: Late model JD crawler technical support
Topic: John deere 350b only cuts one way
Replies: 15
Views: 619

Re: John deere 350b only cuts one way

Did you use Ebay parts? My apologies if you got them from me and I just don't recognize you.
Lavoy
by Lavoy
Sat Mar 02, 2024 11:33 am
Forum: Early model JD crawler technical support
Topic: fuel additive
Replies: 4
Views: 351

Re: fuel additive

I would add that modern fuel is no more likely to plug a pump than fuel of 50 years ago. I am also going to assume you are talking about a 350 or later crawler, and a diesel as well. If you are having plugging issues of any sort, it is not a fault of the fuel unless you have contaminated fuel which ...
by Lavoy
Sat Mar 02, 2024 11:31 am
Forum: Early model JD crawler technical support
Topic: Hardened Valve Seats
Replies: 1
Views: 244

Re: Hardened Valve Seats

Yes, machine shop would need to do it, it isn't expensive, cheap insurance. Ask them as to doing both intake and exhaust.
Lavoy
by Lavoy
Wed Feb 28, 2024 8:33 am
Forum: Late model JD crawler technical support
Topic: Straight 550 transmission
Replies: 4
Views: 327

Re: Straight 550 transmission

Like many other aspects of all crawler, lack of maintenance is what I often see talked about as a reason for failure, specifically not changing the trans filter because it is hard to do. This probably means that the fluid did not get changed much either.
Lavoy
by Lavoy
Mon Feb 26, 2024 8:58 am
Forum: Late model JD crawler technical support
Topic: Straight 550 transmission
Replies: 4
Views: 327

Re: Straight 550 transmission

In general, you do not read anything good about the 550 transmissions. I would say you are looking at a tear down, sorry.
Lavoy
by Lavoy
Fri Feb 23, 2024 1:20 pm
Forum: Late model JD crawler technical support
Topic: Blade compatibility
Replies: 2
Views: 271

Re: Blade compatibility

I am not sure, but I think it is very unlikely.
Lavoy
by Lavoy
Mon Feb 19, 2024 8:44 am
Forum: Off-topic discussions
Topic: pic server DOWN
Replies: 9
Views: 6626

Re: pic server DOWN

Thank you for doing that, way above my pay grade.
Lavoy
by Lavoy
Tue Feb 06, 2024 9:27 am
Forum: Early model JD crawler technical support
Topic: 440icd info
Replies: 7
Views: 820

Re: 440icd info

Any of the J20 spec lubes is my preference as well, or Hygard direct from Deere.
Lavoy
by Lavoy
Mon Feb 05, 2024 9:11 am
Forum: Early model JD crawler technical support
Topic: 440icd info
Replies: 7
Views: 820

Re: 440icd info

Yes, AW32 is what you want. If you are in warmer climes, you can use AW48 as well.
Yes on the GL5, but flush the trans with diesel or kerosene and get as much moisture out as possible first.
Lavoy
by Lavoy
Mon Feb 05, 2024 9:10 am
Forum: Early model JD crawler technical support
Topic: 440 crawler transmission fluid
Replies: 1
Views: 417

Re: 440 crawler transmission fluid

Any GL5 of your choice will be fine.
Lavoy
by Lavoy
Mon Feb 05, 2024 9:09 am
Forum: Early model JD crawler technical support
Topic: Need pictures of back of 1010 crawler loader hydraulic quick connector for backhoe
Replies: 4
Views: 6739

Re: Need pictures of back of 1010 crawler loader hydraulic quick connector for backhoe

If no diverter, likely not a hoe crawler, so will be small pump, and the J hooks will probably not have the heavier bracing of a hoe crawler either.
Lavoy
by Lavoy
Thu Feb 01, 2024 9:13 am
Forum: Early model JD crawler technical support
Topic: 420C track pad bolts
Replies: 1
Views: 478

Re: 420C track pad bolts

That is what I do, grade 5 or 8 is personal preference, factory were grade 5.
Lavoy