JDcrawlers Messageboard

I have to ask what do these acronyms mean?

i could use the 6 way "T" handle valve and small cyl for the angle of the 6 way blade on a 1010 0r i think a 440 . anyone have a setup available .

thanks for the help - i am going to ask if there is a 6 way valve out there first and a cylinder and if not i will snap up the baigain valve you have at least i could use the one side . thanks

i may have a need for the hydrolic control it looks to be a 2 stick with one out of operation .. i could use a control that would operate a 6 way blade

thanks apreciate the reply back .

i was wondering if there was a pump and if they are the same as a 1010 , if so i would like to ask for it . thanks

thanks for the speedy replies - i will look up the number and look at the link thanks again guys

i had left the old gas 1010 at the cottage outside for the winter and had used the girl a little to grade the property and in the late fall i noticed it was not engaging the starter always but with a couple times at the key switch it would finally engage the starter , i thought it was solenoid or ke...

thanks again , just trying to be somewhat knowledgable when i try and turn over this basket case 1010 i bought / sounds to me i best have fresh glow plugs in it and hopefully has a primer from the posts i have read

thanks

i suspect your stating anythuing below 42000 has replaceable tips on the injectors and anything above are the one piece rebuildable

great read what is the serial cut-off for the replacable tips and the other style for the 1010 and 2010 thanks

thanks very much , for the reply

i had spoke to him in 2010 and i sent him a private message a month back , anyone have his contact info . thanks

i believe it may be , i will check thanks