JDcrawlers Messageboard

Shinnery, if you could find the wix number I would appreciate it. Thanks, Tom.

Hello, does anyone have a good part number for a fuel filter for a 440 diesel? The number I have is obsolete according to JD. I have also run the number through Detroit Diesel and it will not fit my housing. The filter housing says Commercial Filters Boston Mass. Thanks, Tom.

Lavoy, were these winches all driven from the pto? Do you have to have a pto shaft to drive the winch? Were there any hydraulic driven winches? Thanks, Tom.

Hello, not that it really matters, there is a picture of this loader on a three roller crawler in the upper left corner. The loader looks the same, but with a much smaller bucket. I am not saying that you should keep the loader on the crawler, but maybe it is more rare with this loader on it. I agre...

Just bought a 440icd and was wondering what the weight is roughly. I have to decide what trailer to take. Thanks, Tom

Just wondering if one is better than the other. Are diesels more reliable than gas engines or is it the other way around? Thanks for any replies, Tom.

Jimmy, I have always had a front throw, because of bad bogies. I have split the track once or twice and used the puller to pull it all back together. It worked quite well. I bought mine from a surplus dealer by Savahna IL. I will try to post a picture of it this week. Steamfitter99

Thanks, I have not torn into it yet. I wanted to know what I was up against before I began. Thanks, Steamfitter99

I need to rebuild the front bogies of a 420c. I was wondering if someone has the bearing numbers for the bearings, and maybe the shaft number as well. Thanks, Steamfitter99

Hello, I picked up a track strecher on ebay a number of years ago and it works quite well. It is on the same line as a bar clamp, but it is specifically made for track pads. The one I have is military surplus. Check out ebay.

Steamfitter99