The external portion of the linkage runs along the lower left hand side of the reverser case. If you find no problems there, then the pin inside of the bell housing may have fallen out. Unfortunately only way to get at that is to pull the engine.
Lavoy
Search found 10813 matches
- Sun Apr 24, 2005 8:17 pm
- Forum: Early model JD crawler technical support
- Topic: drive clutch
- Replies: 1
- Views: 5366
- Sun Apr 24, 2005 8:14 pm
- Forum: Early model JD crawler technical support
- Topic: 10/10 reverser
- Replies: 27
- Views: 33281
Quite a bit of work on a 1010, plus there is a host of other parts that need to be added at the same time. A reverser crawler does not have a clutch, so all ao those parts would need to be added. All in all, not any cheaper than a reverser or reverser rebuilld, same amount of work or more, and the p...
- Sat Apr 23, 2005 8:13 pm
- Forum: Early model JD crawler technical support
- Topic: 3point on a 40C
- Replies: 1
- Views: 5588
- Thu Apr 21, 2005 8:44 am
- Forum: Early model JD crawler technical support
- Topic: 10/10 reverser
- Replies: 27
- Views: 33281
- Thu Apr 21, 2005 8:43 am
- Forum: Early model JD crawler technical support
- Topic: 440 crank case oil coming out of oil dip stick
- Replies: 7
- Views: 11579
- Tue Apr 19, 2005 9:45 pm
- Forum: Early model JD crawler technical support
- Topic: Swap Meet at LeSeuer, MN
- Replies: 0
- Views: 4326
Swap Meet at LeSeuer, MN
I will be leaving Thursday afternoon for the swap meet in LeSeuer, MN, anyone else going?
If you are and need any parts brought there, let me know before Noon on Thursday.
Lavoy
If you are and need any parts brought there, let me know before Noon on Thursday.
Lavoy
- Sun Apr 17, 2005 7:58 pm
- Forum: Early model JD crawler technical support
- Topic: Tach
- Replies: 26
- Views: 27348
- Sat Apr 16, 2005 8:07 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 Engine Rebuild
- Replies: 1
- Views: 5712
- Fri Apr 15, 2005 9:13 pm
- Forum: Early model JD crawler technical support
- Topic: Clutch Tool
- Replies: 4
- Views: 9115
- Fri Apr 15, 2005 8:42 am
- Forum: Early model JD crawler technical support
- Topic: Clutch Tool
- Replies: 4
- Views: 9115
- Thu Apr 14, 2005 8:14 pm
- Forum: John Deere crawler FAQ's
- Topic: BO Lindeman serial numbers
- Replies: 0
- Views: 25575
BO Lindeman serial numbers
1943-332,901 1944-333,110 1945-333,605 1946-335,361 1947-336,441 Note, there were BO Lindeman crawlers produced before 1943, these are commonly referred to as "Flat Back" crawlers due to the shape of the plate on the back of the transmission. These crawlers fall in to the serial number range of 326,...
- Thu Apr 14, 2005 8:04 pm
- Forum: John Deere crawler FAQ's
- Topic: 440 crawler serial numbers and production figures
- Replies: 0
- Views: 26894
440 crawler serial numbers and production figures
1958-440,001 thru 444,127 1959-444,128 thru 453,872 1960-453,873 thru 461,929 The 440ICD was introduced at serial number 448,001, and at this time the gas engine recieved an increase in power of 10% to make the gas engine crawlers more comparable to the diesel crawlers. At this time, the size of the...
- Thu Apr 14, 2005 7:48 pm
- Forum: John Deere crawler FAQ's
- Topic: 430 crawler serial numbers and production figures
- Replies: 0
- Views: 22588
430 crawler serial numbers and production figures
1959-140,001 thru 157,023
1960-157,024 thru 161,072
Total production 2,240 crawlers
Lavoy
1960-157,024 thru 161,072
Total production 2,240 crawlers
Lavoy
- Thu Apr 14, 2005 7:42 pm
- Forum: John Deere crawler FAQ's
- Topic: MC serial numbers and production figures
- Replies: 0
- Views: 22861
MC serial numbers and production figures
1949-10,001 thru 11,092
1950-11,093 thru 13,373
1951-13,374 thru 15,430
1952-15,431 thru 20,509
Total production, 10,509.
Lavoy
1950-11,093 thru 13,373
1951-13,374 thru 15,430
1952-15,431 thru 20,509
Total production, 10,509.
Lavoy
- Thu Apr 14, 2005 7:37 pm
- Forum: Early model JD crawler technical support
- Topic: hydraulic
- Replies: 6
- Views: 12151