Search found 362 matches
- Sat May 18, 2013 7:43 pm
- Forum: Early model JD crawler technical support
- Topic: Looking at a JD 440, and I have some questions.
- Replies: 16
- Views: 14355
First: I don’t see the alignment issue you refer too. It would be hard to tell until the tracks are tightened. The track frame does adjust with spacers to align it, but it is not usually a problem. More track alignment issues are caused by worn idlers, sprockets, and rollers. The track frame does no...
- Mon May 06, 2013 4:49 pm
- Forum: Early model JD crawler technical support
- Topic: 61 1010 loader
- Replies: 2
- Views: 3028
You can find answers to all your questions, plus good detailed pictures in the John Deere 440 Tractor Service Manual, which covers the wheel tractor and the crawler. Or even the Operator's Manual for the crawler might be worthwhile for you. It is not as detailed as the Service Manual but will get yo...
- Mon May 06, 2013 4:23 pm
- Forum: Early model JD crawler technical support
- Topic: eBay "original paint" JD440IC
- Replies: 4
- Views: 3991
- Mon May 06, 2013 5:28 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 440 idc for sale
- Replies: 3
- Views: 4681
- Mon May 06, 2013 5:27 am
- Forum: Early model JD crawler technical support
- Topic: eBay "original paint" JD440IC
- Replies: 4
- Views: 3991
eBay "original paint" JD440IC
A new definition to the phrase "the paint you see is original"!!?? I did not realize that in 1959 the original factory paint scheme for the radiator was black with yellow overspray. Gil
http://www.ebay.com/itm/1959-John-Deere ... SS:US:3160
http://www.ebay.com/itm/1959-John-Deere ... SS:US:3160
- Tue Apr 30, 2013 4:05 pm
- Forum: Early model JD crawler technical support
- Topic: blade control
- Replies: 5
- Views: 4701
57jd420 is probably referring to the spring in the float control portion of the valve. A valve with float control may have been an option but is frequently found with the bulldozer blade. Look in the parts manual for the blade or it may be included in the parts manual for the JD1010 itself. Even if ...
- Sat Apr 27, 2013 6:54 pm
- Forum: Early model JD crawler technical support
- Topic: 420c hydraulic cylinder seals
- Replies: 5
- Views: 5487
The part you asked about is a wiper seal, primarily used to keep dirt out of the cylinder, not to keep oil in. If your cylinder is leaking it is from a seal or packing within the cylinder. Depending on the design, you have to remove a threaded fitting, spring clip, etc. to remove the end of the cyli...
- Fri Apr 26, 2013 8:35 pm
- Forum: Early model JD crawler technical support
- Topic: 440 track adjuster
- Replies: 5
- Views: 5098
The JD440 hydraulic adjust is no longer available from Deere. The JD350 adjuster will work but looks a little different if you are looking for original restoration. There is an after-market hydraulic adjuster that is considerably cheaper and I have heard a number of people say they are very happy wi...
- Thu Apr 25, 2013 5:26 am
- Forum: Early model JD crawler technical support
- Topic: Will 1010 all hydraulic blade fit a 2010?
- Replies: 9
- Views: 8398
- Mon Apr 22, 2013 8:56 pm
- Forum: Early model JD crawler technical support
- Topic: Simple 440ICD Questions
- Replies: 8
- Views: 6458
- Wed Apr 17, 2013 4:30 pm
- Forum: Early model JD crawler technical support
- Topic: Model 50/51 Backhoe swing cylinder (JD420/430/440/1010/2010)
- Replies: 0
- Views: 2047
Model 50/51 Backhoe swing cylinder (JD420/430/440/1010/2010)
Has anyone ever found a source for the internal rubber and leather components for the swing cylinder on a Model 50/51 backhoe? Because I do not have any replacement parts, I have never torn mine apart, but I assume that it has vanes with seals that wipe against the sides of the barrel cylinder. Is t...
- Sat Mar 30, 2013 7:51 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: machinery for sale
- Replies: 4
- Views: 4808
Would you please send me an email at gilpringle@hotmail.com or call me at 717-337-2280 letting me know what you have and what you want for it. Of course, any pictures would be great. Thanks Gil
- Fri Mar 29, 2013 11:08 pm
- Forum: Early model JD crawler technical support
- Topic: coomon ignition problems?
- Replies: 25
- Views: 16981
Paul’s comments about the insulator bushing are worth checking into. You may not visually see any deterioration of the insulation, so put some tape around it to test it. Next time you order parts you should replace the insulator blocks in any case. Have you taken the points plate off and inspected t...
- Sat Mar 23, 2013 5:50 pm
- Forum: Early model JD crawler technical support
- Topic: steering clutch tool/bearing adjustment
- Replies: 12
- Views: 8546
- Thu Mar 21, 2013 8:14 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: machinery for sale
- Replies: 4
- Views: 4808