JDcrawlers Messageboard

Try tractor parts.com bought a rod for the lift cylinder of a 450C if you have a part number their site is hooked to dismantler all over the country.

JIM

doing a repair of the blade control of a 450C thought I would check prices on JD Parts for the spring pins that were needed was very suprised that all 9 peices came to a grand total of $6.70 I was thinking under $20.00 I would go with it . I have done repairs in the past and bought some at auto part...

tried posting before and have never figured It out yet will try again soon !

looks like there is three of us doing under carriges and paint jobs on 450C's I am also building up my clevis ends with bronze rod and redrilling to tighten all the linkage it is working well

JIM

Iam doing the same thing I bought the old construction yellow in spray to do the engine from JD and industrial yellow from TISCEO good color match on both brush and foam roller on flat surfaces appearance paint job not a restoration .mines an 85.


JIM

Just purchased chains sprockets and 4 rollers for a 450c through a dealer then found out i could have purchased direct from wear house TREK check them out



JIM

better off with a liquid filled hydraulic pressure gauge more accurate !!!


JIM

Howes equipment parts is where i bought from good prices from heavy quip.com

also it came down to shipping cost that sealed the deal also 2% off with wire transfer wasn't much


JIM

placed order today for chains sprockets 4 bottom rollers $2231.66 inc shipping spring will arrive Monday purchased 1" gr. 8 threaded rod to hold spring together after its compressed $44.00

Thanks for the replies found one on eBay 250.00 its on the the way also I have available where I used to work a 50 ton arbor press just have to make the up the rod to hold it together my caps are in pretty bad shape presently soaking in muradic acid will inspect tomorrow track frame is completely di...

deere price 1091.09 !!! now i see that I need both sides one side was very noticeable, the other not so noticible break is right next to rear support,

Have a broken spring needing replacement new used after market??



JIM

I will check out both ways .

thanks JIM

Going to be removing track chain it needs new pins and bushings. wondering if replacement with after market chain is less expensive than having p&b replacement
any input would be appreciated

JIM

your filter may have split as the case with mine had to pry it up that is the only way to get to it is by removing the cover.



jim