JDcrawlers Messageboard

jtrichard you are correct on the pilot bearing. I cleaned my old bearing with tooth past the 8502 showed up ,I hope to get a bearing in town. The bearing locked up and I lost all my steering on that side. The clutches plates where rusty and the disk looked new . I hope that was my trouble . I have t...

Stan There was guy in N Y that had a bone yard full of old JD parts his health was bad. I ordered pinion and other parts from him, when I find my very old phone charger I have his number .

My 350 has been setting for 2 years . I use a needle grease fitting it shoots out a fine stream of grease. My 350 has button head fittings , the needle fitting works fine for greasing the rollers. If the seals are blown I would grease it often .

I rebuilt my 350 steering clutching 3 years ago and used to clear my land for a house with great success, It set for 2 years and started right up. It would only steer to the right nothing on the left , after taking everything apart I find the pilot bearing froze up. It looks like something I can get...

It could be either side slipping. The way I see it pulling the left lever locks up the left brakes an clutches letting the right side power the left turn. Now going back wards will be the opposite. Im thinking the left clutch is badley out of adjustment or a gernade went off inside the clutch housei...

That was cool . When I did my clutches I had oil evey where . Just woundering did you change the seal from the pinon after disturbing evey thing it might be a good idea to get new pinon seals.

That would be the last thing I would take off. If it moves at all it should free up. I would drill very small hole above the shaft an spray pentrating oil . Somebody else may do something different.

bamaboy2006 wrote:Were are you located and would you be interested in selling the 93 model?

I added 1 ft of 3/4 hose on the back of the hoe to make for easier connection. I have not advertised it on cregs list . I live in southeren N M . The bucket bushing are worn easy fix. The rest
are in good shaped .

This post was full of nothing but hard core crawer hands. Amazing little machines .

I have 93 A back hoe it,s a burte. I ran it last week to brake up clay. The out riggers leak off. The bushing are worn out it swings very good an digs good . Its way to big for my 1970 350 thats what Deere put on them. Its alot better suted for the 450. I have a smaller 1500 LB case hoe that looks a...

I have 1970 350 with reverser when I put the manual shift in reverse the reverser still workes but opposite of what it should work . It happened by accident. It must over ride the hyd reverser. I didn't like. What is going on with the manual reverse? I should try leaveing the reverser in nutural an ...

This may sound funny but I took my worn out teeth off an cut mobil home springs 6 inchs an cut point on each one. I welded them to the old tooth useing Stanless steel rod I have no trouble cutting through the clay on my place.

I have 1970 350 with power steering boster, It's option very nice for the old dry clutch crawer.

You might see if there is bolts missing they full out an tear the under carage apart. I have welded undercarrage and put the bolts back in so it should be ok.

You might see if there is bolts missing they full out an tear the under carage apart. I have welded undercarrage and put the bolts back in so it should be ok.