JDcrawlers Messageboard

Looking for a final drive or 2 for a JD 430 / 420. Would consider buying an entire parts machine if the final drive housings are good. Let me know what you have.

Just bought a 440 diesel and I smoked the starter. Not exactly sure why if the switch stuck or what,but I had smoke literally coming out of the end of the starter. I left it idle for about 5 mins while I was doing something else and then I noticed my slight electrical issue not a good day. Do I go t...

Thanks guys.

Maybe this is a silly question but does a 350b and a 350c crawler take the same fuel injector? Anybody have a part number?

I don't have an injector left.

I am assuming you have a reverser on this machine? Have you checked the fluid level?

I have a 1010 Diesel Crawler/Dozer with a bad engine, won't fire. Tracks need repinned as they are wore through, rail height doesn't look bad. Email with needs and offers. The gear shift is on the floor board and not on dash. Located in Green Springs, Ohio 44836. Can Email Pics of parts. Have manual...

Just curious if anyone knows if the engine guards from a 450b would fit a 350c?

What does a diesel 1010 crawler loader weigh? What will it lift?

Looking for the weight of a 1010 crawler with 6 way blade, and the weight of 1010 with loader. Also looking for the lifting capacity of the crawler loader. Thanks, Mike

Thanks for the info. Would any of the drive train swap with the 440? Final drives? Sprockets and chains do if I remember correctly.

Considering buying a 1010 Dozer with 6 way power blade and was wondering if it would be a "bolt" on for a 440? It is the inside mount blade.

Thanks,
Mike

Looking for the right and left engine guards for 350c. Thanks.

Working on my 350c getting ready to put the rollers on the track frame, there appears to be a gap of 1/8" from the front cross member to the track frame while jacked up. The bolts are tight and the bushings are there, am I missing something? Should I machine the bushings down and make this a tight f...

Thought I would ask before I try this. I have a new track chain that I haven't put the pads on yet, and I was thinking of installing the master pin in the chain prior to putting the pads on, and also trying to install the chain on the crawler. Then install the pads. Anyone try this? I don't have a m...