JDcrawlers Messageboard

Hello Marc, I use kits made by Reliance. Local distribution for me is Endurance Power in Lincoln, NE. There use to be many more builders/ manufacturers. A&I use to be very competitive in pricing. They very putting such a hurting on the big boys, that the big boy bought them up. As you can imagine, p...

The lever actuates a two step process. First part is pushing a throw-out bearing into a steering clutch to release the drive power to that side. Keep pulling the level and there is a cam to engage the brake band to prevent free wheel travel on that side. Brake pedal will pull both R and L brake band...

Adjust with pedal fully at the rest stop

Adjust with brake fully at the rest stop

I agree with Jim. It is a tight fit, and there is likely a lot of garbage to dig out.

Good luck

Perfectly safe, assuming all is adjusted well.

WOW

Excellent news. I would not have recommended them if I had not had excellent experience with Bunker Hill. I have a spare cable hanging on the shop wall!

Best regards, Bruce

Yes, we hope it something easy. I have concern about oil contamination of the brake. If you get the leak fixed the winch brake may not hold on a pull. I have read, seen and heard of lots of ways to try to rejuvenate a brake before simply replacing an oil contaminated brake band (which is the longest...

Hello Sir. The left side of the 3325 should be dry. The brake band is in there along with the brake hydraulic cylinder. The master clutch for the winch is inside the left case, also. Here is the online parts for the brake- https://partscatalog.deere.com/jdrc/sidebyside/equipment/67823/referrer/navig...

I suspect it is massive corrosion from mouse urine on the trans input shaft trying to pass out of the clutch disc. Wiggle wiggle coffee break, spray, wiggle wiggle, spray lunch. Repeat .

I have taught that a sleeve is removable, like dry vs wet. I would use “cylinder wall” to describe your situation. Mouse and rat piss are extreme corrosive. Lots of wiggling, persuasion, several coffee breaks etc.

Best regards,
Bruce

I replaced the cable on my C series. I did not remove the air filter, I didn’t bunk it would help me situation on the C series. I did remove the hood, R engine screen, lifted and secured the loader, removed the fuel filter to get the the right rear of the engine, where the cable connects to the spee...

I have bought online from bunker hill. Superb quality. It is important to measure the length, as there were 3 different lengths, I believe all the same PN. https://www.ebay.com/itm/163652723033?hash=item261a766159:g:SloAAOSwxW9dwOHd&amdata=enc%3AAQAHAAAAsOst9vkVSAhwfdLpSW0PYH47p1MUmgfIfJO6tgD5rGgAgl...

Hello 431Dwayne, Because of the contamination you found initially, the 5 out 10 push dwindling to 1, I would suggest another change of the filter and a cleaning of the screen. Are you in a position to change out the entire trans fluid? Even though this is an older machine, this site would consider y...