From Deere Spec sheet on 831
Overall width (over idler brackets outside of 12" shoes) - 61 1/8"
Height - 70" (at highest point the pivot for bucket arms)
Overall Length - 105 1/2"
Walter.
Search found 38 matches
- Mon Dec 01, 2008 8:09 pm
- Forum: Early model JD crawler technical support
- Topic: 440 w/loader dimmensions
- Replies: 4
- Views: 4989
- Thu Nov 06, 2008 8:50 pm
- Forum: Early model JD crawler technical support
- Topic: 831 loader weight
- Replies: 2
- Views: 3905
crawler & 831 weight
Having hauled a bare crawler and one with a 831 loader on the same trailer, I would guess 4000 lbs for the 831. From original 1959 Deere Brochures.... Bare crawler, gas, about 6000 lbs. Crawler, gas, with 831 loader, 4 counterweights and scarifier 11,026 lbs. Crawler with 831 loader and scarifier 11...
- Thu Oct 23, 2008 6:13 pm
- Forum: Early model JD crawler technical support
- Topic: Transmission output shaft shims
- Replies: 0
- Views: 1936
Transmission output shaft shims
I was at the John Deere dealer looking for output shaft shims for my late 440. (Fits between the front bearing and the output, pinion shaft.) Initially I only found the 0.002" shims, M2056T, so I asked him to check the other numbers (discontinued) for any subs. I was prepared to buy 20 0.002" shims ...
- Thu Mar 06, 2008 7:51 pm
- Forum: Early model JD crawler technical support
- Topic: fine tuning 40c
- Replies: 18
- Views: 14854
Carburetor
An item to investigate that I experienced. I had a TSX carburetor on another make of crawler, which I had to run very rich to keep it running. It had a removable venturi that was sucking air internally from the atmospheric vent on the bowl. Took me about a month to figure it out, sealed the venturi ...
- Sun Feb 25, 2007 8:46 pm
- Forum: John Deere crawler FAQ's
- Topic: 440 w/831 Loader MSRP
- Replies: 3
- Views: 12681
Prices
From April 2, 1959 sales literature that I recently bought: 440 IC w/63 Dozer reverser, 5 speed, deluxe seat- $ 4,857.25 440 IC w/64 Dozer reverser, 5 speed, deluxe seat- $ 5,276.50 430 C w/62 Dozer 4 roller, reverser, 4 speed, deluxe seat- $ 4,702.75 440 IC w/602 Dozer reverser, 5 speed, deluxe sea...
- Sat Feb 10, 2007 9:08 pm
- Forum: Early model JD crawler technical support
- Topic: 440icd tranny
- Replies: 9
- Views: 8343
440 Trans
I have a 440 ICD (1960) the casting number on the side is not real clear, but it appears to be T11396T as well as a parts gas crawler (IC, no serial number) that I have. Both are 5 speeds and have the dipstick on the top. Comparing my late 440 ICD parts book (1966) with my early 440 IC parts book (1...
- Fri Oct 13, 2006 3:47 pm
- Forum: Early model JD crawler technical support
- Topic: JD 440 ICD fuel shut off
- Replies: 10
- Views: 10424
- Wed Oct 11, 2006 9:41 pm
- Forum: Early model JD crawler technical support
- Topic: JD 440 ICD fuel shut off
- Replies: 10
- Views: 10424
Another makes 3
Michael,
I have a 440 ICD also, would appreciate pics, and am definitely interested if you could make an additional "phase two".
Thanks,
Walter
I have a 440 ICD also, would appreciate pics, and am definitely interested if you could make an additional "phase two".
Thanks,
Walter