Part number should be on the pump.
None of them come with the window, it is only installed for timing, then removed.
Lavoy
Search found 10805 matches
- Thu Oct 05, 2023 5:33 pm
- Forum: Late model JD crawler technical support
- Topic: identify my 350 injection pump
- Replies: 8
- Views: 5481
- Thu Oct 05, 2023 8:23 am
- Forum: Show & Tell
- Topic: 40C Project
- Replies: 12
- Views: 19463
Re: 40C Project
Congrats, enjoy it.
Lavoy
Lavoy
- Thu Oct 05, 2023 8:22 am
- Forum: Early model JD crawler technical support
- Topic: John Deere mc with log grapple
- Replies: 1
- Views: 2229
Re: John Deere mc with log grapple
No, jobber or home made.
Lavoy
Lavoy
- Tue Sep 19, 2023 9:29 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: final drive housing
- Replies: 1
- Views: 7084
Re: final drive housing
Should have one on hand.
Lavoy
Lavoy
- Fri Sep 08, 2023 7:30 am
- Forum: Early model JD crawler technical support
- Topic: 420C Rubber Tracks?
- Replies: 12
- Views: 15128
Re: 420C Rubber Tracks?
Can't find it, but it is 74 at the end instead of 72.
Lavoy
Lavoy
- Wed Sep 06, 2023 9:11 pm
- Forum: Late model JD crawler technical support
- Topic: JD 350C Brake bands
- Replies: 2
- Views: 3629
Re: JD 350C Brake bands
Very highly unlikely that someone can reline the wet brake bands, but it's possible. Usually you don't see many rebuilds on the wet clutch crawlers, so if yours are worn, you may have other underlying issues.
Price you are seeing on bands, and the freight seem high to me.
Lavoy
Price you are seeing on bands, and the freight seem high to me.
Lavoy
- Wed Sep 06, 2023 9:09 pm
- Forum: Early model JD crawler technical support
- Topic: JD 420c Crawler Hydraulic System
- Replies: 8
- Views: 9673
Re: JD 420c Crawler Hydraulic System
I would GUESS that your setup would be at 1500PSI which if I am correct would explain the lack of power. Flow is another factor, you may be down on flow and pressure both.
Lavoy
Lavoy
- Wed Sep 06, 2023 9:08 pm
- Forum: Early model JD crawler technical support
- Topic: 420C Rubber Tracks?
- Replies: 12
- Views: 15128
Re: 420C Rubber Tracks?
There is a set that will work on the 440, figure about $4000 for the conversion.
Lavoy
Lavoy
- Tue Sep 05, 2023 7:56 am
- Forum: Early model JD crawler technical support
- Topic: JD 420c Crawler Hydraulic System
- Replies: 8
- Views: 9673
Re: JD 420c Crawler Hydraulic System
Probably not enough info to give a real accurate answer, would need more info on factory or jobber hoe. But the short answer is if it is already at correct operating pressure, increasing it will just break things. If capacity is not enough, then you need a larger hoe, not more pressure.
Lavoy
Lavoy
- Tue Aug 29, 2023 7:53 pm
- Forum: Early model JD crawler technical support
- Topic: 1010C Radiator
- Replies: 3
- Views: 4739
Re: 1010C Radiator
Crawler radiator is unique to the crawler unfortunately.
Lavoy
Lavoy
- Thu Aug 10, 2023 7:13 am
- Forum: Early model JD crawler technical support
- Topic: 440 vs 1010 Finals
- Replies: 4
- Views: 5144
Re: 440 vs 1010 Finals
Internals are different, some other differences, but I BELIEVE they will work. If you have a diesel crawler, gear ratio will be different.
Lavoy
Lavoy
- Tue Jul 25, 2023 7:05 am
- Forum: Early model JD crawler technical support
- Topic: MC grinding noise
- Replies: 10
- Views: 7908
Re: MC grinding noise
You can't really "see" the front bearing enough from the top to get a good idea of condition. A hardened roller in a bearing never smooths out. Run it and the bearing will fail, or whatever else is feeling rough will fail.
Lavoy
Lavoy
- Sat Jul 22, 2023 2:01 pm
- Forum: Late model JD crawler technical support
- Topic: '68 350B right side final drive removal
- Replies: 12
- Views: 6045
Re: '68 350B right side final drive removal
You do not just arbitrarily add or remove shims, you need to measure the freeplay in the shaft, and adjust for proper preload.
Lavoy
Lavoy
- Sat Jul 22, 2023 1:59 pm
- Forum: Early model JD crawler technical support
- Topic: 1963 JD crawler with reverser
- Replies: 13
- Views: 14722
Re: 1963 JD crawler with reverser
R & R only, there are no new crawler water pumps available.
Lavoy
Lavoy
- Wed Jul 19, 2023 7:55 am
- Forum: Early model JD crawler technical support
- Topic: 420c reverser through the motions
- Replies: 2
- Views: 5146
Re: 420c reverser through the motions
Not unusual, the clutch might be dragging just enough to keep it spinning. Make sure you don't have excess freeplay in the clutch pedal. Can also be the pilot bearing going bad or already bad and spinning the input shaft.
Lavoy
Lavoy