Search found 10803 matches
- Fri Mar 16, 2007 10:18 am
- Forum: Show & Tell
- Topic: IRONYETTY'S 440 IC TOY
- Replies: 6
- Views: 7920
I would have to find my book to be sure, but about 9,250lbs pull, first wrap, full throttle. That is about what the book says, in my experience, it will drag a 5 roller 420 with a 62 blade across the yard with the engine idling and about 6 wraps of cable on it with the blade down, and the tracks loc...
- Fri Mar 16, 2007 7:48 am
- Forum: Show & Tell
- Topic: IRONYETTY'S 440 IC TOY
- Replies: 6
- Views: 7920
- Thu Mar 15, 2007 4:04 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: New skid shoes for 62, 63, 64, 602 blade coming soon
- Replies: 1
- Views: 2975
New skid shoes for 62, 63, 64, 602 blade coming soon
Coming soon, new reproduction skid shoes for 62, 63, 64, 602 and numerous other blades for 40-450. I have all the pieces cut, and will be assembling this week.
Lavoy
Lavoy
- Thu Mar 15, 2007 4:03 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: More new parts coming soon!
- Replies: 1
- Views: 3026
More new parts coming soon!
Should have some more new parts in next week.
New master shields
New PTO's
New dash lights
New muffler clamps
New 430 manifolds
and more.
Lavoy
New master shields
New PTO's
New dash lights
New muffler clamps
New 430 manifolds
and more.
Lavoy
- Thu Mar 15, 2007 1:15 pm
- Forum: Show & Tell
- Topic: 1010CA Rebuild Project Part VIII
- Replies: 10
- Views: 11472
- Thu Mar 15, 2007 12:09 pm
- Forum: Early model JD crawler technical support
- Topic: Error in 440I and IC battery doors
- Replies: 0
- Views: 1816
Error in 440I and IC battery doors
To any of you guys that have gotten the RH removeable battery door for your 440 gas crawler or tractor, and are having problems fitting it, contact me. I think I have discovered one potential problem with the door. You can send me your old one, and if bad, the problem will be corrected or the door w...
- Wed Mar 14, 2007 9:24 pm
- Forum: Late model JD crawler technical support
- Topic: Need photocopy or measurements of 350 clutch tool
- Replies: 2
- Views: 5111
- Wed Mar 14, 2007 7:47 am
- Forum: Early model JD crawler technical support
- Topic: Which way would you go on these control valves?
- Replies: 7
- Views: 5759
- Tue Mar 13, 2007 9:50 pm
- Forum: Early model JD crawler technical support
- Topic: Which way would you go on these control valves?
- Replies: 7
- Views: 5759
- Tue Mar 13, 2007 9:30 pm
- Forum: Early model JD crawler technical support
- Topic: Which way would you go on these control valves?
- Replies: 7
- Views: 5759
- Tue Mar 13, 2007 1:49 pm
- Forum: Early model JD crawler technical support
- Topic: proper backhoe attachment 420c
- Replies: 2
- Views: 4191
Correct hoe would a #50 or #51. I doubt you will ever find the mounthing brackets and all of the other assorted pieces that go along with putting one of them on a 420. Even if you did, you would hate it. A 440 is unstable at best with a hoe on it, and 420 would be almost scary, not to mention the in...
- Tue Mar 13, 2007 1:46 pm
- Forum: Early model JD crawler technical support
- Topic: 440ICD will engine still run after?
- Replies: 14
- Views: 13151
- Mon Mar 12, 2007 7:48 pm
- Forum: Early model JD crawler technical support
- Topic: 350 sprocket guards fit 1010
- Replies: 2
- Views: 3073
- Mon Mar 12, 2007 9:12 am
- Forum: Early model JD crawler technical support
- Topic: 440 IC Steering Clutch
- Replies: 8
- Views: 9370
- Sun Mar 11, 2007 7:58 pm
- Forum: Early model JD crawler technical support
- Topic: 440 IC Steering Clutch
- Replies: 8
- Views: 9370
Unless you like pulling final drives, replace them. I know I know, I sell clutch discs, but nonetheless, for the effort involved, it is not worth having to redo it. If they have been that wet, they are damaged at least to some extent. Picture hosting instructions are listed at the top of the show an...