Don,
Disc is new, throwout bearing is new, plate is professionally rebuilt. As of right now, I do not need your old core back.
Lavoy
Search found 10810 matches
- Thu Apr 07, 2005 11:31 am
- Forum: Early model JD crawler technical support
- Topic: engine clutch R & R
- Replies: 1
- Views: 6303
- Thu Apr 07, 2005 9:30 am
- Forum: Early model JD crawler technical support
- Topic: Hourmeter repair
- Replies: 1
- Views: 6446
- Wed Apr 06, 2005 8:44 am
- Forum: Early model JD crawler technical support
- Topic: Welcome to the new messageboard
- Replies: 2
- Views: 10805
- Tue Apr 05, 2005 5:37 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 420 crawler with #90 loader for sale
- Replies: 1
- Views: 5751
- Tue Apr 05, 2005 5:35 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 track and roller q's
- Replies: 2
- Views: 7243
If the rollers look substantially different from the Deere rollers, they are most likely Berco or one of the other aftermarket supplier. Look on one end of the roller, and you might see a pipe plug that takes a 3/8" ratchet or extension to remove. Remove this and you can refill the roller with oil. ...
- Tue Apr 05, 2005 12:24 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 440 gas crawler with power 6 way for sale
- Replies: 3
- Views: 7440
440 gas crawler with power 6 way for sale
I am going to sell my 440 with a power 6 way blade. 5 speed, reverser, dual hydraulics, #64 blade, good sprockets, excellent rails and rollers. Can't remember serial number, but it is a later crawler with big transmission. I took the undercarraige out from under it to start restoration, but now am g...
- Tue Apr 05, 2005 12:22 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 420 crawler with #90 loader for sale
- Replies: 1
- Views: 5751
420 crawler with #90 loader for sale
Listing this for a friend. 420 crawler, #90 loader, 5 speed, I am pretty sure it has a reverser, but will try and check this afternoon, and get pics if any one is interested. I have done most of the work on this crawler for him. It has had new pins and bushings very recently, new bushings and seals ...
- Tue Apr 05, 2005 12:21 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: Key ignition switches
- Replies: 0
- Views: 4972
Key ignition switches
Key switches, fits 430 and 440IC, $30 + freight.
Lavoy
Lavoy
- Tue Apr 05, 2005 12:20 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: New MC/40 gas/radiator caps in stock
- Replies: 2
- Views: 7049
New MC/40 gas/radiator caps in stock
I have new MC/40 gas/radiator caps in stock, $20 each. The 40 sometimes had the tall cap, but they are over $50, so this is a good alternative.
Lavoy
Lavoy
- Fri Oct 20, 2000 6:01 pm
- Forum: Early model JD crawler technical support
- Topic: Welcome to the new messageboard
- Replies: 2
- Views: 10805
Welcome to the new messageboard
Well, here it is, for better or worse. I think it is lots better, it gives us more options and features. I hope everyone that was registered on the old board does so here. I won't have much time to play with it for a couple more days, but from what little I have played with it so far, it has been fu...