Search found 1874 matches
- Sat Aug 06, 2011 10:42 am
- Forum: Late model JD crawler technical support
- Topic: 1968 John Deere 1010 needs starter
- Replies: 9
- Views: 11664
- Fri Aug 05, 2011 10:29 pm
- Forum: Late model JD crawler technical support
- Topic: 1968 John Deere 1010 needs starter
- Replies: 9
- Views: 11664
- Fri Aug 05, 2011 9:18 pm
- Forum: Late model JD crawler technical support
- Topic: 1968 John Deere 1010 needs starter
- Replies: 9
- Views: 11664
any rebuild shops near you? i know im spoiled have a starter alt. shop about 15 miles from me if you can find one a rebuild would run from 80 to 200 there is one on ebay 175 plus shiping the seller says it diesel its not its gas i tried to tell him that its for a gaser he said i think i know what i ...
- Fri Aug 05, 2011 10:56 am
- Forum: Early model JD crawler technical support
- Topic: Ideas on Freeing Up Stuck Engines on 2010s
- Replies: 16
- Views: 15871
- Thu Aug 04, 2011 8:55 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 eccentric pins on the loader, are they easy to remove?
- Replies: 6
- Views: 6148
- Tue Aug 02, 2011 9:21 pm
- Forum: Early model JD crawler technical support
- Topic: will not start
- Replies: 3
- Views: 4548
sounds like the old style rubber coupling in the pump is gone nothing 8 or 900 wont fix. Make sure you have fuel to the pump if so pull the injector lines and see if you get fuel there it sounds like you wont. I was told once there are three reasons a diesel wont run and thats fuel,fuel and fuel hop...
- Mon Aug 01, 2011 9:55 pm
- Forum: Early model JD crawler technical support
- Topic: JD 1010 ICD Glow Plugs
- Replies: 4
- Views: 4709
nos switch
i did mistype and said right when i ment left and i double checked and if you have a nos key switch you will find that it powers the preheaters while in the start mode i have taken two of mine apart and cleand and lubed them and that is the way they are ment to work not trying to be an ass just i kn...
- Mon Aug 01, 2011 9:46 pm
- Forum: Late model JD crawler technical support
- Topic: injector pump
- Replies: 2
- Views: 3167
pump leak
if it is one of the injector lines they use a banjo bolt and two washers just get new washers and it will be fine i bet. you can get them at a injection shop or if your not near one jd has for a price kinda like gold from them
- Mon Aug 01, 2011 10:26 am
- Forum: Show & Tell
- Topic: deleted
- Replies: 25
- Views: 24312
- Mon Aug 01, 2011 12:15 am
- Forum: Early model JD crawler technical support
- Topic: 1010 eccentric pins on the loader, are they easy to remove?
- Replies: 6
- Views: 6148
- Sun Jul 31, 2011 10:53 pm
- Forum: Late model JD crawler technical support
- Topic: What's a 450B with steering clutch problems worth?
- Replies: 20
- Views: 18926
- Sun Jul 31, 2011 10:49 pm
- Forum: Late model JD crawler technical support
- Topic: What's a 450B with steering clutch problems worth?
- Replies: 20
- Views: 18926
- Sun Jul 31, 2011 9:59 pm
- Forum: Show & Tell
- Topic: deleted
- Replies: 25
- Views: 24312
- Sun Jul 31, 2011 9:47 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 Special Grease Gun/Zerks
- Replies: 9
- Views: 10409
the type of zerks are called button zerks and most any good parts store can get them and gun end to. I just bought both and a low pressure oil gun for my 2010 works greatYou can put reg.zerks on the adjusters as they take reg. grease.Two reasons for the button type zerks are they dont damage as easy...
- Sun Jul 31, 2011 12:27 pm
- Forum: Early model JD crawler technical support
- Topic: JD 1010 ICD Glow Plugs
- Replies: 4
- Views: 4709