Depends on the ground you're plowing, bottom size, depth, etc., but in most conditions, a 2-14 would be about it.
Lavoy
Search found 10804 matches
- Thu Jan 11, 2007 9:05 am
- Forum: Early model JD crawler technical support
- Topic: Which plow for a 40C?
- Replies: 2
- Views: 3670
- Wed Jan 10, 2007 6:36 pm
- Forum: Off-topic discussions
- Topic: Hough 4wheel drive
- Replies: 3
- Views: 5280
- Wed Jan 10, 2007 10:08 am
- Forum: Early model JD crawler technical support
- Topic: Need advice on soaking and free-ing 420c steering clutches
- Replies: 2
- Views: 3832
Neither product is the best, here's why. The discs are rusted together, and nothing really dissolves rust effectively other than water or acid. Second, if you soak a fiber disc with a petroleum product, it will stay in there forever, and sooner or later cause the clutch to slip if the clutch does un...
- Wed Jan 10, 2007 9:57 am
- Forum: Early model JD crawler technical support
- Topic: 440ic "popping" at idle
- Replies: 2
- Views: 3298
- Wed Jan 10, 2007 9:55 am
- Forum: Early model JD crawler technical support
- Topic: 420 3 point woes
- Replies: 2
- Views: 3377
Larry, There are no bushings in the housing, so if it is rusty, the shaft is rusted to the housing. I would not lift on it, no sense taking the risk. Pull the fill plug and dump as much penetrating stuff as you can in there and gently hit on one of the lift arms once in a while to see if the vibrati...
- Tue Jan 09, 2007 8:42 pm
- Forum: Early model JD crawler technical support
- Topic: 440IC Roller Shaft & Bushings
- Replies: 5
- Views: 5113
Don I am out of shafts right not, I have one in for cost ananlysis as we speak, have not heard back yet. There are no oversize bushings, I suppose they used to just throw them away. One thing I can think of is to bore the roller for 440 front idler bushings, and use a 440 front idler shaft. That may...
- Tue Jan 09, 2007 6:00 pm
- Forum: Early model JD crawler technical support
- Topic: 440IC Track Tensioner Spring Shields
- Replies: 1
- Views: 2398
- Tue Jan 09, 2007 3:19 pm
- Forum: Early model JD crawler technical support
- Topic: 420 tracks
- Replies: 5
- Views: 4857
- Tue Jan 09, 2007 10:26 am
- Forum: Off-topic discussions
- Topic: Mccormick-Deering
- Replies: 1
- Views: 3963
- Tue Jan 09, 2007 10:24 am
- Forum: Early model JD crawler technical support
- Topic: 420 tracks
- Replies: 5
- Views: 4857
- Tue Jan 09, 2007 10:23 am
- Forum: Early model JD crawler technical support
- Topic: 430c
- Replies: 9
- Views: 7292
- Tue Jan 09, 2007 8:04 am
- Forum: Early model JD crawler technical support
- Topic: Fan blades.. bent or are they normal??
- Replies: 5
- Views: 6211
- Mon Jan 08, 2007 10:50 pm
- Forum: Early model JD crawler technical support
- Topic: 430c
- Replies: 9
- Views: 7292
- Mon Jan 08, 2007 10:07 pm
- Forum: Early model JD crawler technical support
- Topic: 430c
- Replies: 9
- Views: 7292
- Mon Jan 08, 2007 7:24 pm
- Forum: Early model JD crawler technical support
- Topic: 430c
- Replies: 9
- Views: 7292