JDcrawlers Messageboard

just picked up these two 450s. guess i needed another winter project lol.
andrew

hi, after searching for two months i finally bought 2 450 crawlers. one i believe is a striaght 450 and the other is a 450c. the 450c runs good, but wont move almost acts like something between the motor and tranny came disconnected. the 450 is missing part of the motor, but otherwise looks to be in...

brian, yes i believe they are. hes planning on putting a 350 diesel and reverser in it this winter and wants the wider pads for sugaring.

andrew

brian, i am in northfield. my friend might be interested in swapping pads if u are.

andrew

hi, are those pads 4bolt or 2? i have a friend that just bought a 5 roller 1010 with brand new 12" pads and he wants 14s. i will check with a friend today to see if he has any of the other parts u want.

andrew

kevin, does the gear come off the cam? if it does i might have one just picked up a cam for a friend cause his cam is cracked on both ends.

andrew

dan, if lavoy doesnt have what u need i think i have a block.

andrew

i have removed several 1010 and 350 final drives. i find it just as easy to put a bolt in one of the holes in the rear mounting pad and then run a chain from that to the lifting device. works pretty good.

andrew

hi, if lavoy doesent have what u need i do.

andrew

hi, my book lists 1010 gas with 610 at 8,340, 1010 gas with 612 at 8,464, and the 1010 gas with 616 at 8,314.


andrew

1965 350 diesel with 6way, 3pt, reverser, power steering. has new steering clutches, i replaced 4 rolls, replaced the steering clutch housings. i have the manuals as well as a spare motor and tranny. asking 14,000 for everything or 9,000 without the 3pt. i am only selling cause i need something bigg...

for sale 50 backhoe. took it off a 1010 tractor, but will fit 440, 1010, 2010 crawlers and tractors. has some welds and needs three relief valves replaced, but will work the way it is. asking 700. located in VT. johndeere430c@yahoo.com or 802-485-6258.

Jac, i just took a 50 backhoe off my 1010 that i am trying to sell. pm me if u are interested.

andrew

hi keith, i have a inside manual angle blade off a 1010, i think they might fit. let me know and we can do some measuring. also i am goin to glen, nh tomorrow, could bring them along if u want to meet up.

andrew

VTdeere, where abouts in vt are u located? i am in northfield.

andrew