Search found 149 matches
- Wed Mar 30, 2016 6:04 pm
- Forum: Late model JD crawler technical support
- Topic: oil leak---HELP
- Replies: 11
- Views: 9062
oil leak---HELP
we just rebuilt my brother-in-law's 350c transmission, assembled the final drives with Loctite 515 - cleaned-primed, let it set overnight and when we filled it they leak-----both sides the same. my question is should we use a diff. sealer such as Permatex ultra black or something of that sort ?????
- Sat Mar 19, 2016 1:19 am
- Forum: Late model JD crawler technical support
- Topic: Left the master switch on.
- Replies: 16
- Views: 14850
- Fri Feb 26, 2016 6:19 am
- Forum: Late model JD crawler technical support
- Topic: 350C isolator CONVERSION - "C" to "D"
- Replies: 56
- Views: 46406
- Thu Feb 25, 2016 7:15 pm
- Forum: Late model JD crawler technical support
- Topic: 350C isolator CONVERSION - "C" to "D"
- Replies: 56
- Views: 46406
https://scontent-ord1-1.xx.fbcdn.net/hphotos-xta1/t31.0-8/12748091_1266812693346069_1931231872341450560_o.jpg this is the back of the reverser where you check and shim the main drive shaft and the counter shaft (the one with the two gears on it). each cap has thin and thick shims in a pack. you will...
- Wed Feb 24, 2016 6:43 pm
- Forum: Late model JD crawler technical support
- Topic: replacing idler yoke 350 john deere
- Replies: 3
- Views: 3297
- Wed Feb 24, 2016 6:37 pm
- Forum: Late model JD crawler technical support
- Topic: 350C isolator CONVERSION - "C" to "D"
- Replies: 56
- Views: 46406
Be sure to shim BOTH end bearings properly. mine was deafening prior to the shimming I did. They all whine a little from the one's I have heard, and possibly the gears were worn in such a way that after the bearing repair in your reverser they do not mesh exactly the same to each other causing the w...
- Sat Feb 13, 2016 8:40 am
- Forum: Late model JD crawler technical support
- Topic: 350C isolator CONVERSION - "C" to "D"
- Replies: 56
- Views: 46406
- Sat Feb 13, 2016 8:31 am
- Forum: Late model JD crawler technical support
- Topic: 350 transmission noise?
- Replies: 14
- Views: 10353
- Sat Feb 13, 2016 8:06 am
- Forum: Late model JD crawler technical support
- Topic: 350 transmission noise?
- Replies: 14
- Views: 10353
No, pulling the power unit out of these crawlers is very easy(at least on the dozer models) If you look at the side pic with the springs you can see what the rattle is --- the small fingers that stick out under each spring at the flywheel surface come in contact with the dowel pins an cause the nois...
- Sat Feb 13, 2016 7:39 am
- Forum: Late model JD crawler technical support
- Topic: HELP ! to identify a crawler series
- Replies: 7
- Views: 5667
- Sat Feb 13, 2016 6:58 am
- Forum: Late model JD crawler technical support
- Topic: 350 transmission noise?
- Replies: 14
- Views: 10353
- Fri Feb 12, 2016 8:36 pm
- Forum: Late model JD crawler technical support
- Topic: HELP ! to identify a crawler series
- Replies: 7
- Views: 5667
- Fri Feb 12, 2016 8:21 pm
- Forum: Late model JD crawler technical support
- Topic: 350 transmission noise?
- Replies: 14
- Views: 10353
- Fri Feb 12, 2016 8:17 pm
- Forum: Late model JD crawler technical support
- Topic: 350 transmission noise?
- Replies: 14
- Views: 10353
https://scontent-ord1-1.xx.fbcdn.net/hp ... 3692_o.jpg
This is what the "RATTLER" style looks like --- if you are wondering.
https://scontent-ord1-1.xx.fbcdn.net/hp ... 0583_o.jpg
This is what the "RATTLER" style looks like --- if you are wondering.
https://scontent-ord1-1.xx.fbcdn.net/hp ... 0583_o.jpg
- Fri Feb 12, 2016 7:45 pm
- Forum: Late model JD crawler technical support
- Topic: 350 transmission noise?
- Replies: 14
- Views: 10353