Search found 488 matches
- Sat Oct 10, 2009 12:51 am
- Forum: Early model JD crawler technical support
- Topic: 602 blade weight
- Replies: 1
- Views: 2342
602 blade weight
hi guys, wanting to know the weight for a complete 602 blade ?
- Sat Oct 10, 2009 12:37 am
- Forum: Early model JD crawler technical support
- Topic: 440ic with 6 way blade....how much does it weigh?
- Replies: 2
- Views: 3246
- Thu Oct 01, 2009 6:05 pm
- Forum: Late model JD crawler technical support
- Topic: JD 450 in Sweden
- Replies: 112
- Views: 105854
perkins motor was in overseas model
ulf, i just remembered reading about the oversea's models that were assembled in germany and had perkins 3 cyl, engines,, i was reading your posts but now i see your at seven pages so i didn't take the time to see if you've positively identified the motor.,,,also,what does fuel cost in sweden?
- Thu Oct 01, 2009 2:49 pm
- Forum: Early model JD crawler technical support
- Topic: 440 IC Surging
- Replies: 7
- Views: 6804
carb surging
we had a 420 tractor doing something of the same,,, seams the linkage and spring was worn along with the worn hole,,, was all loose enough to allow carb to vary , it was a simple fix.
- Thu Oct 01, 2009 8:53 am
- Forum: Early model JD crawler technical support
- Topic: GM 2-53 engine
- Replies: 19
- Views: 19577
the days of big kahuna's
we also had some jimmy's ,, one of them(12v71) we had to reach down on the pump and pull/hold a lever till dead,,,, the other was in an international truck and had its own pull lever... also , the 12v had safety gauges that would trip a solenoid on the pump in case of low pressure, or high temp. , t...
- Thu Oct 01, 2009 12:39 am
- Forum: Early model JD crawler technical support
- Topic: blower operation
- Replies: 4
- Views: 5914
tilting an oilbath
you guys have any luck with changing out the oilbath to the dry type filters?i would consider this only because i plan to do some steep climbing and oilbath might not be so good.
- Wed Sep 30, 2009 10:47 am
- Forum: Early model JD crawler technical support
- Topic: Track cross reference
- Replies: 11
- Views: 12683
Re: now it's gone again
still not showing up,pop pop wrote:it doesn't show up again... maybe make a link to it
- Sat Sep 26, 2009 10:09 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 1959 440 crawler for sale
- Replies: 1
- Views: 3419
- Mon Sep 21, 2009 7:15 pm
- Forum: Early model JD crawler technical support
- Topic: Want a crawler - having trouble
- Replies: 12
- Views: 11885
that dang winch
i would avoid an electric winch like it was the plague., as i went that route and on the first attempt at getting the unit up a steep bank~20ft. i ran the motor outa gas due to the incline,, relied on the battery, and winch ran the batery dead before it got to the top, got a second battery and it fi...
- Thu Sep 17, 2009 12:23 am
- Forum: Off-topic discussions
- Topic: How steep of a hill have you gotten your crawler on?
- Replies: 6
- Views: 7589
back in the 60's my dad had a 420 wheeled tractor with the trencher on the back,,, it had the widest of wide tires, fluid filled,, , it would climb almost straight up , ,, as a kid this always scared the shit out me when the guys were doing this, ,of course nobody would be on it ,,, the only problem...
- Wed Sep 16, 2009 10:51 pm
- Forum: Early model JD crawler technical support
- Topic: help me identify a 440ic
- Replies: 6
- Views: 5028
thanks for the tidbit Lavoy,,, this might have recieved the transplant,,, i read somewhere (two cylinder magazine)that the carb intake tube was slightly larger than normal on some of the gas engines to add HP.in an effort to compensate for removing the jimmy engine, ...it looks like this one has tha...
- Wed Sep 16, 2009 1:38 pm
- Forum: Early model JD crawler technical support
- Topic: help me identify a 440ic
- Replies: 6
- Views: 5028
locations of 440ic serial numbers
is there any other place on this crawler that has the serial number?
the lower dash plate with model and serial number is not there,
the leftside flywheel casting flat spot, yes, but any other serial numbers or numbers that were "model specific"? that would be on the main body.
the lower dash plate with model and serial number is not there,
the leftside flywheel casting flat spot, yes, but any other serial numbers or numbers that were "model specific"? that would be on the main body.
- Tue Sep 15, 2009 6:44 pm
- Forum: Early model JD crawler technical support
- Topic: help me identify a 440ic
- Replies: 6
- Views: 5028
help me identify a 440ic
this is throwing me for a loop, a 440ic ,serial # is 4405xx so that designates it to be a 1958,right? ok, it has a reverser, it has a 5 speed trans, has a pto lever but no pto shaft, the carb intake is a long flextube going back to a oilbath mounted on the rops. it has a throttle lever in the center...
- Tue Sep 15, 2009 11:04 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: Jd Crawler/dozer 1010 for sale
- Replies: 9
- Views: 9646
saw pix of this unit
hey everybody, the pictures of this look pretty good
(i had emailed a request for the pix),,, its too far from me thou.
(i had emailed a request for the pix),,, its too far from me thou.
- Mon Sep 14, 2009 10:31 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: piece of chit roller
- Replies: 3
- Views: 4796
shipping via NASA
hi eric, well before you get serious, look at the shipping charges involved, i'm in arizona,,unless your a snowbird(annual winter visitor),,, we might as well be on 2 different planets,,,, 44 pounds clear across the usa?? hey i don't think my howitzer can reach that far,heehee,,but if my results wor...