Search found 1874 matches
- Wed Mar 11, 2009 12:56 am
- Forum: Show & Tell
- Topic: My "new to me" 2010
- Replies: 18
- Views: 17636
sounds like the end cap on the trans cooler froze i had same thing on one of mine both ends froze before i bought it the caps are not avilable from jd and i could not find any wreckers with one i did find one from a privite party and one cap had been welded on it they can be brazed the gaskets are a...
- Tue Mar 10, 2009 10:57 pm
- Forum: Show & Tell
- Topic: My "new to me" 2010
- Replies: 18
- Views: 17636
trans cooler
reddirt if you can take a pic of the left side of the water pump if it has a 1/2 in copper tube going down off of it then you have a second trans cooler and the end cap might be leaking as well as the one in the rad. if not that there is only the lower rad.tank cooler just like a pass. car rad. has ...
- Tue Mar 10, 2009 10:43 pm
- Forum: Show & Tell
- Topic: My "new to me" 2010
- Replies: 18
- Views: 17636
2010
is the s/n tag still on the loader valve box? if so what is the number and i will see if is close to mine my 2010 is over 42000 i will have to look to see what the exact numbers are
- Tue Mar 10, 2009 10:20 pm
- Forum: Show & Tell
- Topic: My "new to me" 2010
- Replies: 18
- Views: 17636
- Tue Mar 10, 2009 9:50 pm
- Forum: Show & Tell
- Topic: My "new to me" 2010
- Replies: 18
- Views: 17636
2010
your chains are in great shape where is the s/n at on the the engine? look on the bell housing left side for another one it looks like the upper roller is in the center if it is then your s/n should be over 42000 if it is closer to the rear then it is before 42000 if they changed the engine you migh...
- Tue Mar 10, 2009 8:15 pm
- Forum: Early model JD crawler technical support
- Topic: 2010 steering clutches
- Replies: 8
- Views: 7381
2010 brake
it can be done but it is a total PAIN you might want to wait
- Mon Feb 09, 2009 8:11 pm
- Forum: Show & Tell
- Topic: Newbie with a 350
- Replies: 2
- Views: 4737
350
looks like a pretty tight machine but you might want to look into weld on grouser bars soon
- Sat Jan 24, 2009 10:17 pm
- Forum: Early model JD crawler technical support
- Topic: Priming system for a 2010
- Replies: 31
- Views: 26212
- Thu Jan 22, 2009 10:47 pm
- Forum: Early model JD crawler technical support
- Topic: Priming system for a 2010
- Replies: 31
- Views: 26212
I think that kit is just the fitting and hoses as for the other pumps i would not take a chance that they are not positive shut off pumps like the kohler style and with the fuel tank being above the engine if it does not shut off completly it will fill the intake and a cylinder with fuel then if you...
- Wed Jan 21, 2009 7:24 pm
- Forum: Early model JD crawler technical support
- Topic: Priming system for a 2010
- Replies: 31
- Views: 26212
yes primers do help with starting if you dont have one you can also set the throttle to full and start that way with the preheaters just make sure you back it down when she fires and preheat till it runs smooth as for using the cheaper pumps other than the oem style (kohler) they dont have the posit...
- Sat Jan 17, 2009 9:12 pm
- Forum: Early model JD crawler technical support
- Topic: stuck steering clutch 2010
- Replies: 3
- Views: 4226
stuck steering clutch 2010
anyone had any luck breaking free a stuck clutch i have shimed the pressure plate out trying to get as much pressure off of the discs as i could no luck i was thinking about water and maybe with antifreze as it cuts rust some what
- Tue Jan 13, 2009 12:38 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: ripper shanks wanted
- Replies: 1
- Views: 2710
ripper shanks wanted
looking for ripper shanks for a mod. 36 on a 2010 i hear they are the same as one used on an early JD grader
- Tue Jan 13, 2009 12:04 am
- Forum: Early model JD crawler technical support
- Topic: cant delete
- Replies: 0
- Views: 1794
cant delete
i can edit but i cant get it to delete
- Mon Jan 12, 2009 11:50 pm
- Forum: Early model JD crawler technical support
- Topic: 1010c engine issues
- Replies: 7
- Views: 7890
a 1010 or 2010 is the same they can be bored .020 over but that is not much if you have piting your up that creek i have a bored liner plate but the pits are still there they might not be as bad as yours i just did not want to take the risk as i use my 2010s a lot yes i said 2010S i now have three 2...