Search found 694 matches
- Sun Aug 28, 2022 8:30 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 air leak
- Replies: 11
- Views: 3884
Re: 1010 air leak
Have you replaced the filter? Not quite the same but a plugged filter caused my vacuum pump to cavitate when transferring wine and caused it to pull in air.
- Sat Aug 27, 2022 8:42 am
- Forum: Early model JD crawler technical support
- Topic: 1010 air leak
- Replies: 11
- Views: 3884
Re: 1010 air leak
Might try pressure in the suction line. It would force oil out of the leaky spot if it is in the line. Eliminate one thing at a time.
- Thu Aug 25, 2022 4:20 pm
- Forum: Early model JD crawler technical support
- Topic: 1010 air leak
- Replies: 11
- Views: 3884
Re: 1010 air leak
If it only happens on a slope, I would check the tank suction line. Over fill the tank to see if it changes anything.
- Wed Aug 17, 2022 8:52 am
- Forum: Early model JD crawler technical support
- Topic: 440ICD Track shoes on backwards
- Replies: 11
- Views: 4070
Re: 440ICD Track shoes on backwards
Thanks, I didn't think about the pressed in bushings. Makes sense now.
Gus
Gus
- Tue Aug 16, 2022 8:08 am
- Forum: Early model JD crawler technical support
- Topic: 440ICD Track shoes on backwards
- Replies: 11
- Views: 4070
Re: 440ICD Track shoes on backwards
No doubt more force forward most of the time. I'm still looking at the chain picture and try to grasp why it makes a difference? Either way, you're pulling on the links. I was trying to see if it was also a factor of getting dirt in there.
- Mon Aug 15, 2022 1:08 pm
- Forum: Early model JD crawler technical support
- Topic: 440ICD Track shoes on backwards
- Replies: 11
- Views: 4070
Re: 440ICD Track shoes on backwards
Can you just 180 the track or does the chain have to run one way? Not different than backing up?
- Wed Aug 10, 2022 8:58 am
- Forum: Early model JD crawler technical support
- Topic: 40c Steering Clutches
- Replies: 4
- Views: 2846
Re: 40c Steering Clutches
Check thickness of the discs. They might have swelled due to the water on them.
- Mon Jun 27, 2022 3:23 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 1010 gas unit on Birmingham, AL Craigslist
- Replies: 1
- Views: 2464
Re: 1010 gas unit on Birmingham, AL Craigslist
Not a bad looking machine! Too far.....
- Tue Jun 07, 2022 7:50 am
- Forum: Early model JD crawler technical support
- Topic: Adding pto to 420c
- Replies: 3
- Views: 3406
Re: Adding pto to 420c
Find a complete pto off of a junkyard crawler. Simply remove the cover and bolt it in. Everything else already exists in your crawler. Should be a lot of them out there.
I would suggest taking it apart and replacing seals and lubing before you put it on.
I would suggest taking it apart and replacing seals and lubing before you put it on.
- Sun Jun 05, 2022 9:39 am
- Forum: Early model JD crawler technical support
- Topic: button head grease gun couplers
- Replies: 10
- Views: 3895
Re: button head grease gun couplers
Sounds like you might have a mix of sizes. Someone replaced a few but not all.
- Mon May 02, 2022 7:52 pm
- Forum: Early model JD crawler technical support
- Topic: 420C Rubber Tracks?
- Replies: 12
- Views: 15370
Re: 420C Rubber Tracks?
Kinda quiet around here!
That price tag on rubber tracks wiped out my interest!
That price tag on rubber tracks wiped out my interest!
- Sat Mar 19, 2022 1:59 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: ISO Loader forks
- Replies: 8
- Views: 7923
Re: ISO Loader forks
If\when you get this made. Post how you do it. I have a 420 with loader that's on my list for the next rebuild and I might also like to use it for lifting with forks.
- Sun Mar 13, 2022 12:39 am
- Forum: Off-topic discussions
- Topic: Well, it has tracks!
- Replies: 0
- Views: 10552
Well, it has tracks!
Sold my Kubota excavator, kx41-3v, 4000 lb class machine. I've been renovating some land that is over grown with woody brush, wild rose, Hawthorne trees. Planning on replanting pine and fir trees. The little excavator did a great job but it was working pretty hard and it was slow going. Just picked ...
- Thu Mar 10, 2022 12:58 am
- Forum: Early model JD crawler technical support
- Topic: 1010 Reverser
- Replies: 5
- Views: 3709
Re: 1010 Reverser
Only easy fix I've done: crawler just flat out quit running after a few coughs and jerks.... The fix? Put some gas in and it started right up. Very easy fix not counting having to walk to get gas
- Tue Feb 15, 2022 12:05 pm
- Forum: Lavoy's Little Shop O' Deeres
- Topic: ISO Loader forks
- Replies: 8
- Views: 7923
Re: ISO Loader forks
Possibly buy the front frame and forks off of a junkyard forklift? Wouldn't be to hard to adapt it to the loader frame.