Hi,
Better yet, if you have or can borrow, a thermal imaging camera. See if there are any hot spots which indicate a coolant passage blockage.
Stan
Search found 2849 matches
- Thu Jun 02, 2022 4:03 am
- Forum: Late model JD crawler technical support
- Topic: 350c running warm
- Replies: 9
- Views: 3431
- Fri May 27, 2022 4:31 am
- Forum: Early model JD crawler technical support
- Topic: 1010c blade compatibility help
- Replies: 2
- Views: 2202
Re: 1010c blade compatibility help
Hi,
I have a 350C sitting next to a 420c. And the 420c and the 1010 are very similar. I can tell you a blade, inside or outside mount, from a 350 is not going onto a 420. And so I am 99 percent sure the same applies to the 1010.
Stan
I have a 350C sitting next to a 420c. And the 420c and the 1010 are very similar. I can tell you a blade, inside or outside mount, from a 350 is not going onto a 420. And so I am 99 percent sure the same applies to the 1010.
Stan
- Thu May 12, 2022 4:40 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: jd440ic for sale..SOLD
- Replies: 9
- Views: 9350
Re: jd440ic for sale..SOLD
Hi, I hardly ever use my crawlers. I sold the 350C to a friend last August. Haven't used the 420c since I got the 350C. I still haven't used the 420c since selling the 350C. I really ought to pass that one along as well. I fear that as soon as I do, I will really need it. Sigh. And I'm beginning to ...
- Wed Apr 20, 2022 4:29 am
- Forum: Late model JD crawler technical support
- Topic: '73 - 450B Crawler/Loader/Hoe Restoration
- Replies: 260
- Views: 216470
Re: '73 - 450B Crawler/Loader/Hoe Restoration
Hi,
Yep. More paint prep. Boring to do, not to read about. But you had the best day this week: Fire In The Holes! Only way you get a better day than that with this tale is: When It Crawls Again!
Oh, and my parts guy reuses boxes too. I can see where that would scare the crap out of you.
Stan
Yep. More paint prep. Boring to do, not to read about. But you had the best day this week: Fire In The Holes! Only way you get a better day than that with this tale is: When It Crawls Again!
Oh, and my parts guy reuses boxes too. I can see where that would scare the crap out of you.
Stan
- Fri Apr 15, 2022 4:38 am
- Forum: Late model JD crawler technical support
- Topic: '73 - 450B Crawler/Loader/Hoe Restoration
- Replies: 260
- Views: 216470
Re: '73 - 450B Crawler/Loader/Hoe Restoration
Hi, CW shorthand for If I Remember Correctly. So, now you get to ask; What is CW? Ha! CW is what radio guys call the International Radiotelegraph Code. You might think of it as Morse Code, although there are differences between land wire line Morse and what is used on radio. CW stands for Continuous...
- Wed Apr 06, 2022 4:57 am
- Forum: Late model JD crawler technical support
- Topic: 350 snow calk questions
- Replies: 7
- Views: 3736
Re: 350 snow calk questions
Hi, I have only had dozers with the higher single grousers. They do tear the ground up a bit. The calks don't do anything worse. Just poke holes. Gravel isn't an issue but I stay off pavement unless I want it to become little bricks. I can see where the calks will matter more with low loader grouser...
- Tue Apr 05, 2022 4:47 am
- Forum: Late model JD crawler technical support
- Topic: 350 snow calk questions
- Replies: 7
- Views: 3736
Re: 350 snow calk questions
Hi, My 420c has had calks on since, oh, 1966 when Dad put them on. They don't do anything but poke little holes. The grousers do more tearing up. Well, dozer grousers. Not loader ones. The calks will save you in the winter plowing snow on the driveway on a hill. That is for certain. And why Dad inst...
- Sat Apr 02, 2022 4:22 am
- Forum: Lavoy's Little Shop O' Deeres
- Topic: 440 sold at auction
- Replies: 6
- Views: 15844
Re: 440 sold at auction
Hi,
Not odd for 1 April.....
Stan
Not odd for 1 April.....
Stan
- Fri Mar 25, 2022 5:00 am
- Forum: Early model JD crawler technical support
- Topic: starter keeps turning
- Replies: 19
- Views: 7754
Re: starter keeps turning
Hi, I doubt it is a short. Shorts equal smoke. I doubt it is the solenoid or it would do the same on the bench. That doesn't put a mechanical load on the gear though. If there is too much play between the gear and the starter shaft, the load of turning the engine will bind the gear and not allow it ...
- Thu Mar 24, 2022 4:53 am
- Forum: Early model JD crawler technical support
- Topic: starter keeps turning
- Replies: 19
- Views: 7754
Re: starter keeps turning
Hi,
I am reading all this. But I do not recall any details of the starter used on the Detroit.
I am guessing that wear between the shaft and the gear is allowing the gear to bind on the shaft and preventing it from sliding back.
Stan
I am reading all this. But I do not recall any details of the starter used on the Detroit.
I am guessing that wear between the shaft and the gear is allowing the gear to bind on the shaft and preventing it from sliding back.
Stan
- Mon Mar 21, 2022 4:45 am
- Forum: Late model JD crawler technical support
- Topic: 1979 350C loader
- Replies: 13
- Views: 5154
- Wed Mar 09, 2022 5:30 am
- Forum: Early model JD crawler technical support
- Topic: 1010 Reverser
- Replies: 5
- Views: 3775
Re: 1010 Reverser
Hi,
Wait. What? There was some fix that was easy and simple? (!)
It's Party Time!
Of course, I notice the water pump bearing sent the fan thru the radiator just after.....
But, still. Something was easy to fix on Old Iron! Whoot!
Stan
Wait. What? There was some fix that was easy and simple? (!)
It's Party Time!
Of course, I notice the water pump bearing sent the fan thru the radiator just after.....
But, still. Something was easy to fix on Old Iron! Whoot!
Stan
- Sat Mar 05, 2022 5:42 am
- Forum: Late model JD crawler technical support
- Topic: '73 - 450B Crawler/Loader/Hoe Restoration
- Replies: 260
- Views: 216470
Re: '73 - 450B Crawler/Loader/Hoe Restoration
Hi,
Sounds great!
On the dangling engine, keep in mind they have an axle in front to hold it up, but then the engine holds the transmission up. Wonderful idea, the stressed casting. Don't need a frame that way. One more thing to get in the way!
Stan
Sounds great!
On the dangling engine, keep in mind they have an axle in front to hold it up, but then the engine holds the transmission up. Wonderful idea, the stressed casting. Don't need a frame that way. One more thing to get in the way!
Stan
- Tue Mar 01, 2022 3:51 am
- Forum: Late model JD crawler technical support
- Topic: ROOSA Injector Pump Q / Berry Creek
- Replies: 7
- Views: 3662
Re: ROOSA Injector Pump Q / Berry Creek
Hi, Fuel comes out when you remove that cover, so that is normal. Sounds like a plugged tank vent to me. This is what it all looks like: http://www.jdcrawlers.com/messageboard/viewtopic.php?f=2&t=13107 Try loosening the tank cap when it begins to die. If that straightens it out, run a wire thru that...
- Wed Feb 16, 2022 5:49 am
- Forum: Early model JD crawler technical support
- Topic: Oh crap!
- Replies: 12
- Views: 6997
Re: Oh crap!
Hi,
Problem is, without the plate the filter slides down from the spring in the dome and the filter then bypasses. And the plate sticks to the bottom of the filter from the oil, so they are frequently tossed with the old filter.
Stan
Problem is, without the plate the filter slides down from the spring in the dome and the filter then bypasses. And the plate sticks to the bottom of the filter from the oil, so they are frequently tossed with the old filter.
Stan